nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

Child Item

Manuals / Request a manual

Pixelitis

Hi

I'm sure I saw a request on these boards before for this but I can't find it now.

I'm looking for the user manual for a Scopetronic homeguard alarm. Moved into new house and no manual available so don't know what half the readings mean.

If anybody could direct me to where I can get one it would be great.

Ta very much

Pix

Find more posts tagged with

alarm

house alarm

manuals

engineer manuals

user manuals

Quick Links

Comments

altor

abcde_1 wrote: »

Hi I just bought a house from the office of public works it is fitted with a Europlex signet 100 panel and I was hoping to get a copy of the install manual it would be great if somebody could help

Sent you that by P.M.

abcde_1

Hi I just bought a house from the office of public works it is fitted with a Europlex signet 100 panel and I was hoping to get a copy of the install manual it would be great if somebody could help

altor

bennz wrote: »

Can you pm me that manual please.

No Problem, sent you that by P.M.

bennz

deiserebel wrote: »

Hi Guys,
I am looking for a installation manual for a HKC quantum 70. Just had fitted and seems to be great. just have to sort out the remote activation by app ....

Thanks

Can you pm me that manual please.

altor

3 Dollar Bill wrote: »

Hi,

The keypad was showing a battery fault for sometime until I opened the panel today to find out the model of the HKC. When I closed back up the panel the battery fault had disappeared, is this normal? I would assume that the battery still needs to be swapped out.

In fear that I will need to reprogram it after taking out the battery, Can someone PM me the engineers and user manuals please.

Thanks

I have sent you the engineers manual.
Here is a link to the user manual.
It should not of, only thing I can think of is the battery attachment was loose and you knocked it back to make contact. Just see how it is over the next couple of days.

3 Dollar Bill

Hi,

The keypad was showing a battery fault for sometime until I opened the panel today to find out the model of the HKC. When I closed back up the panel the battery fault had disappeared, is this normal? I would assume that the battery still needs to be swapped out.

In fear that I will need to reprogram it after taking out the battery, Can someone PM me the engineers and user manuals please.

Thanks

altor

jimout wrote: »

What is the engineer's code for Scopetronic Homeguard ?
I had a new back up battery fitted and the system reprogrammed and it worked fine.

Then we got another power cut and the alarm would not stop ringing, I thought the new battery would take over, it did not.

Any ideas ?

Jim

01234 is the default engineer code.
04567 is the default user code.
You would need to put a meter on the leads to see if the panel is supplying the battery with a charge.

jimout

What is the engineer's code for Scopetronic Homeguard ?
I had a new back up battery fitted and the system reprogrammed and it worked fine.

Then we got another power cut and the alarm would not stop ringing, I thought the new battery would take over, it did not.

Any ideas ?

Jim

john_graydon

Just wondering is there a how to to install a new sensor as I have found the culprit that's setting my alarm off. Have wireless system.

john_graydon

john_graydon wrote: »

Hi looking for the engineers manual for HKC smart watch panel.
I have the engineers code. Thanks & great thread.

Thanks KK.

john_graydon

Hi looking for the engineers manual for HKC smart watch panel.
I have the engineers code. Thanks & great thread.

coleyb1979

Hi
I am looking for manual for Astec 63DV. Many thanks in advance.

nedley

Hi all,

Anyone got installation manual for HKC Securewatch Panel. Board in panel says Type CIE Model 6/10. This system belongs to next door neighbor. He said that alarm was going off and he couldn't turn it off so he opened panel and found that terminal on battery was corroded and broken. He took out the battery and disconnected Mains but alarm was still going off (naturally !) At that stage he called into me. I did alarm installation course and many installations/upgrades/repairs but that was nearly 20 years ago so out of touch now. Anyway, called into him, reconnected power to panel and he was then able to shut off system. I got him a replacement battery but when I connected it the alarm sounded and again he could not turn it off. Had a look at his keypad at front door and it had a message scrolling saying "No rkp comms". After a bit of Googleing I found that a few other people had similar problems with replacement batteries and no rkp comms but I couldn't find a definite answer. I ended up opening the bell box to disconnect the siren as system couldn't be turned off.
Todays plan is to check
1. If there is power going to keypad, power led on keypad was off but messages were still scrolling?. I assume that there should be 12v going to keypad but need diagram to check.
2. Continuity on cable between panel and keypad, I will be very surprised if cable is faulty
3. Check if panel itself is faulty. This is where I need installation manual and some advice. I read in a thread somewhere that if a certain led is on, system is ok but if led is flashing then board is faulty. I would be grateful for any more info or details on this.
System also contains a digi board, not sure of make and model. Neighbor used to be connected to eircom phonewatch but said that he was out of contract with them for a few years. I told him that it should be possible to program digi to ring his mobile or other phone but thats for another day.
Apologies for being so long winded but thought it was better to give as much detail as possible.

Regards to all

fdover

Hi Guys,

I'm trying to fix an old panel, would any one have a manual for the Europlex Identifier alarm panel?

Many, many thanks!

conship

kiemo wrote: »

Hi was wondering did you get the astec Manual and would it be posiable to get a copy thanks Kieron

Yes and will send you a copy a little later this evening as im away from my computer

kiemo

Hi was wondering did you get the astec Manual and would it be posiable to get a copy thanks Kieron

altor

Tesoneill wrote: »

Anyone have a engineer manual for an old system Europlex Verifier6 . Had to replace the battery and would love to get my hands on the manual as the user guide had no info , too basic. Any help appreciated

Sent you the manual by P.M.

Tesoneill

Anyone have a engineer manual for an old system Europlex Verifier6 . Had to replace the battery and would love to get my hands on the manual as the user guide had no info , too basic. Any help appreciated

altor

Boboo wrote: »

With my Astec 63D the keypad is reading Sab fault and bell fault (fault 22) so I was hoping to put in a S22 module and put in a HKC bellbox, what could I replace the internal sounder with for the easiest option? Thanks

If you fit the sab converter (S22) then the internal and the converter are still wired into the sounders bus on the control panel.

Boboo

With my Astec 63D the keypad is reading Sab fault and bell fault (fault 22) so I was hoping to put in a S22 module and put in a HKC bellbox, what could I replace the internal sounder with for the easiest option? Thanks

altor

paulmm1978 wrote: »

Hi All.My sisters Astec alarms is banjaxed.The outside bellbox is gone and one sensor also.They are astec sensors.I am going to replace it with a HKC 10/70. I was wondering if anyone would have the installation manual for the 49dv so I can have a look and try figure out the resistors i need for the conversion(so I dont have to replace every contact) if that is possible?The contacts on it seem to be 680 and 340 Ohm ones when open.Sorry..new to writing anything on boards as I usually find what I am looking for on here
Thanks

Sent you the manual by P.M.

paulmm1978

Hi All.My sisters Astec alarms is banjaxed.The outside bellbox is gone and one sensor also.They are astec sensors.I am going to replace it with a HKC 10/70. I was wondering if anyone would have the installation manual for the 49dv so I can have a look and try figure out the resistors i need for the conversion(so I dont have to replace every contact) if that is possible?The contacts on it seem to be 680 and 340 Ohm ones when open.Sorry..new to writing anything on boards as I usually find what I am looking for on here

Thanks

altor

arturg wrote: »

Hi
I am looking for manual for Astec 63DV. Many thanks in advance.

Sent you that by P.M.

arturg

altor wrote: »

Sent you that by P.M.

Hi
I am looking for manual for Astec 63DV. Many thanks in advance.

altor

Boboo wrote: »

Could anyone send me an Astec alarm engineers manual please? Thanks

Sent you that by P.M.

Boboo

Could anyone send me an Astec alarm engineers manual please? Thanks

julius2

Hi Kool Kid,

Got your link for above
Many thanks.

julius2

Hi
I am looking for an engineers/installation manual for an astec 63 alarm system.
Please if someone can help

Thanks in advance

deiserebel

Hi Guys,
I am looking for a installation manual for a HKC quantum 70. Just had fitted and seems to be great. just have to sort out the remote activation by app ....

Thanks

ciarsd

Hi folks, would anyone be able to assist me and share the manual for an Astec 63DV - I have the engineers code to access.

Many thanks.