Technofobe wrote: » That worked great Zardoz :-) I just did a manual scan & pulled them in using those frequencies cheers Do you happen to know if there is an AutoBouquets for hyper 4 & will it work if I have all my channels in 1 favorites bouquet Thanks for your help
hallo dare wrote: » It's in your plugins
Technofobe wrote: » thanks for the quick reply but cant find it in my plugins or downloadable plugins have checked twice Maybe i need to go to specsavers after all :-) The image that I am using is not a backup of the images here and I think I uninstalled a lot from it when I put it on the box Thanks
hallo dare wrote: » Quickest option is to flash a v4 from here, unless someone has an AutoBouquets plugin they can put up.
Technofobe wrote: » Thanks Hallo Dare I will leave it alone so as I am really happy with the way it is setup at the mo just thought it might save me retuning channels from time to time Thanks again :-)
Zardoz wrote: » OpenATV for Spark is coming soon Great news OpenAtv have announced that they are releasing a Pre beta Image for a small set of SH4 Models including the Alien 1 and Alien 2 This is big news
Technofobe wrote: » looks nice almost a kind of windows 8 look to it Has anyone tried it yet ?
hallo dare wrote: » Was there a sky skin in there Zardoz? May download and install one if there isn't.
Zardoz wrote: » I didnt see one,highly unlikely ,I'd imagine a skin like that would have copyright issues and wouldnt be on a plugins server. Just bear in mind this image is still a pre release beta so it might be buggy.
Zardoz wrote: » This receiver is going to be the Dogs you know what with these new image developments.
cyndale wrote: » I've been using FreshPots Hyperion V4 image and it has suddenly got very 'buggy'! It gets stuck on a channel and no amount of pushing buttons on the remote will shift it. I have turned it off and back on again and it works for a while again. When it is stuck on a channel it works perfectly except I can't change the channel or change the volume! Reverted to Spark for the moment!:eek:
same ol sh1te wrote: » Yeah, i have that too, restart enigma every few days and delete the crossepg database and build it from scratch weekly
kc66 wrote: » I got but cannot get it to work in a few of the images linked from this thread. I tried enabling the drivers in Blue Panel- one of them allowed wifi access points to be detected but if I tried to connect to one it just exited. Any ideas?
kc66 wrote: » I got this wifi stick but cannot get it to work in a few of the images linked from this thread. I tried enabling the drivers in Blue Panel- one of them allowed wifi access points to be detected but if I tried to connect to one it just exited. Any ideas?
Technofobe wrote: » You don't say what box or what image your using at the moment does it work in spark ? just to rule out a faulty item Also could be a good time to test out the new OpenAtv image posted by Givecredit above might be a better driver in that
Nowso wrote: » wifi sticks are run on gereally 3 different chipsets on some enigma 2 images you need to choose to activate the drivers for your specific dongle chipset most of them are raillink5070 i think it is just check your dongle details you then need to go into network and activate wifi lan and in use interface and enter all you wifi sid and password and encryption type etc can be a bit awkward to set up
givecredit wrote: » Below is a link to my new OpenATV 4.1 based Complete Image - for the Amiko Alien2, Golden Media Triplex and other ST7162 Based Boxes. This is a game changer image for these boxes. Build with OE-A 2.2 many many more Plugins complete identical Linux and folder struture like all mipsel boxes online Update system via IPK like all mipsel Boxes rework drivers less e2 hacks needed VFD Diskplay now fully skinned with e2 hardware depend complete fresh Build all tools and linux from July 2014 no more old libs and binarys Full Feature openATV Image Full Online Feed all Source are open Source for all every can build where own image thanks to all SH4 Developer thanks to Duckbox-Developer thanks to TDT Duckbox Team thanks to Project magpie and all plugin devs Enjoy! Backup Link here:https://www.dropbox.com/sh/un0urrb6weq4yd5/AACt507f3lt0S641mC5ylStsa
kc66 wrote: » Sorry, thought this was only amiko alien 2 thread (thats the box Im using). I tried all the images in this post. Ill try that new one. It works in spark. I tried all that I think- activated all the drivers included in the images, looks like I need to install a different driver but I dont know where to find it.
Nowso wrote: » what chipset is in your wifi dongle ??? try it in spark n see will it connect up
Fresh Pots wrote: » Loaded it up on my box and it seems like it could be a good image in the future but as its still in beta its quite buggy. Also having similar issues with saorview as I had with champs ar-p image. Sometimes one mux works, sometimes 2 do but I'm getting picture breakup on mux 2 when it does work. Good to see the ondemand plugin working. I'll definitely be keeping a close eye on this image but for now I'll stick with H4.
hallo dare wrote: » Same as that! Hv4 will do perfect for now. To be fair, it does all i want of it!
Fresh Pots wrote: » The openatv image does allow for some nicer features such as Ondemand plugin and a better now, next later epg amongst other things so once it's stable I'll definitely be switching.
kc66 wrote: » From this link it appears to be RALINK RT5370. Yes it works in spark.
