Mumha wrote: » I got efibre installed last Wednesday and the initial wired test was 39mb Download and 9mb upload (would be happy with that). However I had nothing but dropping on the Wifi and the netgear powerline adaptors (which were working perfecting fine up to Wed) are not working as they should. 1. If I connect a cable from my laptop to the router, it works fine. 2. Wifi downstairs is intermittent (router is in attic). 3. My Adaptors are not finding/passing through any internet, even though it appears the green flashing light is flickering away. Could it be a setting issue ? I have 2 x XAV2001, 1 x XAV2101 and 1 x XAVN2001 They were working fine up to Wednesday.
Bog Standard User wrote: » dropping wifi means log onto the modem and and take the wifi channel off Auto and set the wifi channel on the best channel to suit your house. use InSSider to scan your house for the least used channel as this will be the best channel to use
Bog Standard User wrote: » did you try pairing the home plugs first bring both of them into the same room... plug them in side bside and click the pair buttons. then try moving one plug to it's desired location. also home plugs must be on the same power circuit in order to work if the one narrow trip switch in the fuse box turns off both power sockets then its good if there is 2 narrow trip switches that for example one turns off power sockets downstairs and another turns off power sockets upstairs then your fecked
