nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

Child Item

Manuals / Request a manual

Pixelitis

Hi

I'm sure I saw a request on these boards before for this but I can't find it now.

I'm looking for the user manual for a Scopetronic homeguard alarm. Moved into new house and no manual available so don't know what half the readings mean.

If anybody could direct me to where I can get one it would be great.

Ta very much

Pix

Find more posts tagged with

alarm

house alarm

manuals

engineer manuals

user manuals

Quick Links

Comments

KoolKid

Hi I PMed you that manual.
Hope that helps.
Any problems you know where we are.;)

Banjo

I don't suppose anyone has the installation manual for an ancient Itec Meridian 2? Google suggests it may be a copy of the Aritech CP32 if that helps?

pduffy50

Hi Folks, looking for a copy of the HKC SecureWatch installation/engineers manual?

KoolKid

Banjo wrote: »

I don't suppose anyone has the installation manual for an ancient Itec Meridian 2? Google suggests it may be a copy of the Aritech CP32 if that helps?

I,ve nothing on them I'm afraid.
If you need help with anything in particular start a thread & we'll see what we can do for you.

pduffy50 wrote: »

Hi Folks, looking for a copy of the HKC SecureWatch installation/engineers manual?

PMed you that.

pduffy50

Thanks KoolKid

Banjo

KoolKid wrote: »

I,ve nothing on them I'm afraid.
If you need help with anything in particular start a thread & we'll see what we can do for you.

Thanks for looking anyway. I think If i get far enough that i need help, more than a thread what I'll need is a big ladder and a hammer to shut that f'ing bell up

SemperFidelis

Hi, I'm looking for the manual for the Siemens SPC 5320

KoolKid

PMed you that manual.
Any problems give us a shout.;)

SemperFidelis

Thanks, I'm sure I'll have plenty

555

Hi all, I'm wondering if anyone could point me at a copy of the HKC SecureWatch installation/engineers manual?

KoolKid

PMed you that manual. If you need any help give us a shout.

555

Thanks. Really appreciate that.

jbshn

many thanks Koolkid.appreciate your help

KoolKid

Your welcome.

Willieor1

Hi by any chance would anyone have an installation manual for Hkc quantam 70.
Cheers

SkyBlueRed

Would anyone have a manual for a Gemini P1632 alarm panel or could pm me how to default engineer code. Cheers in advance.

KoolKid

Willieor1 wrote: »

Hi by any chance would anyone have an installation manual for Hkc quantam 70.
Cheers

PMed you that.

SkyBlueRed wrote: »

Would anyone have a manual for a Gemini P1632 alarm panel or could pm me how to default engineer code. Cheers in advance.

Sent you a PM. Not sure if its what your looking for

Willieor1

KoolKid wrote: »

PMed you that.

Sent you a PM. Not sure if its what your looking for

Cheers Koolkid , appreciated

SkyBlueRed

KoolKid wrote: »

Sent you a PM. Not sure if its what your looking for

Cheers Koolkid.

Jinni

Hi

Would it be possible to get a copy of installation/engineers manual for an Aritech CS350 alarm system please.

Thanks.

KoolKid

PMed you that manual.

Jinni

KoolKid wrote: »

Disconnect terminals 18 & 19 & wire a short length of cable across from one to the other.

Gotcha, will try that, will have to be tomorrow now.

Many thanks again.

Jinni

KoolKid wrote: »

Disconnect terminals 18 & 19 & wire a short length of cable across from one to the other.

Disconnected 18 & 19, put a small piece of wire to both ends of 18 & 19 and reconnected, switched mains back on, now unable to set alarm as its showing open zone 3, went and undone above but still showing open zone 3 and cannot set alarm.

What am I not doing correctly?

Or am I misinterpreting exactly what you mean when disconnecting terminals 18 & 19?

Thanks

KoolKid

Did you disturb any of the connections into zone 3?

finnigan

Hi, I need to reset a scoptronic home guard.

Could anyway he send me an engineers installation guide please.

I've no idea how to reprogram one of these panels.

Cheers.

KoolKid

I PMed you that manual.
Any problems give us a shout.

finnigan

Cheers koolkid :-)

Hstearn

I have just bought a house with an HKC610 V2.1 alarm fitted. Does anyone have a user manual, installer manual and the engineers code for this alarm please?

KoolKid

I PMed you those manuals. The engineer code would usually be changed by the installer. But the default codes are 1111 & 4567.

Hstearn

Thank you.