Off-Topic Thread

Haven't noticed any myself yet but I'm not far in. You should be able to do 16 x anisotropic filtering without losing many frames.

Have you downloaded the latest beta 13.3 drivers?

Anyone else getting stupid frame drops in Tomb Raider? Was playing earlier at a steady 60 fps but it just drops down to around 20 every so often.
Settings are:
Texture Quality - Ultra
Texture Filter - Anisotropic 2x
Anti Aliasing - off
Shadows - Normal
Shadow resolution - normal
Level of Detail - Ultra
Hair Quality - TressFX
Reflections - Normal
Depth of Field - Ultra
SSAO - Ultra

That's with an I5 3570K and an 7950 1175/1500.
Any ideas? Is it just really poorly optimized or?

Tea_Bag wrote: »

hey Sarz i'd love to try arma3 on the gtx690 if its still going?

started playing farcry3 and ive to turn the settings down a bit at 2560*1440

Ye I've one left give me your steam email and I'll send it on.

Squaredude

ED E wrote: »

Sound one Sarz. Now to see if it'll even look at running on a 7870

Thought my SSD had died yesterday, nearly had a heart attack even though its imaged twice a week. Turned out to just be a microSD let in the reader :rolleyes:

Well it ran fine on my 6870,so I'd say you'll be grand.I have one Arma 3 lite code left if anyone wants it.

Tea_Bag

Sarz91 wrote: »

One more Arma III Alpha lite code to give away. Given one to EDE and just waiting on Bloodbaths Steam email.

hey Sarz i'd love to try arma3 on the gtx690 if its still going?

started playing farcry3 and ive to turn the settings down a bit at 2560*1440

ED E

Sarz91 wrote: »

One more Arma III Alpha lite code to give away. Given one to EDE and just waiting on Bloodbaths Steam email.

Sound one Sarz. Now to see if it'll even look at running on a 7870

Thought my SSD had died yesterday, nearly had a heart attack even though its imaged twice a week. Turned out to just be a microSD let in the reader :rolleyes:

VenomIreland

Lads, do any of you reckon gamestop would break the street date for Monster Hunter 3 Ultimate?

Snowie wrote: »

Has any one notice the prices in Hardwareversand?

The GPU I want to order went up bye €7.00 cpus have gone up... too not as much but prices seem to be climbing.? ?

Ye I noticed that. Kinda the reason I went with OCUK. HWVS was cheaper but not by much. Plus you've to factor in RMA times, knock on wood. Plus OCUK give you a packet of Haribo

Snowie wrote: »

Has any one notice the prices in Hardwareversand?

The GPU I want to order went up bye €7.00 cpus have gone up... too not as much but prices seem to be climbing.? ?

They constantly fluctuate based on supply and demand I imagine.

Snowie

Has any one notice the prices in Hardwareversand?

The GPU I want to order went up bye €7.00 cpus have gone up... too not as much but prices seem to be climbing.? ?

glynf

Think my SSD is on the way out..when I start Win 7 it pauses on the starting windows' logo. The logo is still animated, so I'm guessing its not the BIOS-which is up to date. Just did a restore from a backup on a different drive, and the SSD booted fine and seems OK so far. There are no other fault indicators on the m.board-LED wise, could it be anything else other than the SSD?

1200/1400 1.25 volts. P Score. Max temps around 45-50 degrees.

One more Arma III Alpha lite code to give away. Given one to EDE and just waiting on Bloodbaths Steam email.

BloodBath wrote: »

Either way to be honest. Going to 1250mv is probably the quickest. It's a safe voltage and that cooler is more than up to the task of keeping it cool at that.

Don't think my cooler is at all

It is stable at 1100mhz at less than 1.1v though.

Sarz91 wrote: »

Whats the best way of voltage tweaking? Every where I look people just contradict one another. Some say increase the voltage to around 1.25 volts and then up the core. Others say wait until the core clock causes the benchmark to crash and then go up in increments of 10mV.

Either way to be honest. Going to 1250mv is probably the quickest. It's a safe voltage and that cooler is more than up to the task of keeping it cool at that.

Anyone want an Arma III Alpha lite code? Just pm me your steam email address. I've three, I think, to give away.

BloodBath wrote: »

That's pretty good. It's a good card, you should be able to push 1200 on the core at about 1200mv which is still safe as houses. I got 1525 on the memory at stock voltage. It's a 7970 though but the voltages and memory are the same afaik.

Whats the best way of voltage tweaking? Every where I look people just contradict one another. Some say increase the voltage to around 1.25 volts and then up the core. Others say wait until the core clock causes the benchmark to crash and then go up in increments of 10mV.

That's pretty good. It's a good card, you should be able to push 1200 on the core at about 1200mv which is still safe as houses. I got 1525 on the memory at stock voltage. It's a 7970 though but the voltages and memory are the same afaik.

Gumbi wrote: »

The RAM can get to 1400 plus on stock voltages (RAM is at 1.6v). What is the stock voltage for your 7950 to get 1085mhz?

Stock voltage is 1087mV.

Sarz91 wrote: »

I just started with the core clock only just moving onto the memory clock. It's an ASUS Direct CUII V2. It's a much better score than my 670 used to get.

The RAM can get to 1400 plus on stock voltages (RAM is at 1.6v). What is the stock voltage for your 7950 to get 1085mhz?

BloodBath wrote: »

Why not? What model of card is it?

You probably wont't get much more out of the gpu but those ram clocks are very low. They should be good for at least 1500.

I just started with the core clock only just moving onto the memory clock. It's an ASUS Direct CUII V2. It's a much better score than my 670 used to get.

Why not? What model of card is it?

You probably wont't get much more out of the gpu but those ram clocks are very low. They should be good for at least 1500.

Ok so was messing around with my 7950 this morning and went from a graphics score of 8468 to 9700. Running at 1085/1250 at stock voltages. Don't think I'll bother going above stock voltages.

Squeaky the Squirrel

images?q=tbn:ANd9GcTZwZgrMoN-mxjEbnrDtLruTnpbsLxc5XDUjwOFs9rC62dw_yZncg

dwighet

I had a bearded dragon once....I devorced her..

Gumbi wrote: »

35 degrees ambient? You sure? That's roasting man.

Yup. Bearded dragon needs to be kept around 40 degrees pretty much all through the day. At night now it gets down to around 25. I don't use my comp much during the day for obvious reasons. After he goes to sleep and his heater turns off temps drop a lot. At the moment my CPU is around 25 degrees.

Sarz91 wrote: »

45 minutes was the duration of the test. It's probably worth noting that my pc is in my room with a reptile and the heating is on quite a lot. Ambient temps were prob around 35 degrees.

35 degrees ambient? You sure? That's roasting man.

Gumbi wrote: »

For how long are you stressing it for that temp? I'll put my 3570k back to stock clocks and compare it to my Hyper 212 temps if I get my comp back up and running soon. I think those temps are good, though for your cooler.

45 minutes was the duration of the test. It's probably worth noting that my pc is in my room with a reptile and the heating is on quite a lot. Ambient temps were prob around 35 degrees.

Sarz91 wrote: »

Bought a second hand cooler master v8 the other day for €20ish only got around to installing it there. Using OCCT my max temp under 100% load is 55 degrees. Is that about average for a stock 3570k?

For how long are you stressing it for that temp? I'll put my 3570k back to stock clocks and compare it to my Hyper 212 temps if I get my comp back up and running soon. I think those temps are good, though for your cooler.