schmegeggin wrote: » hi all we currently have a wireless eircom phonewatch alarm with fixed phone line and looking at getting tv/broadband/phone package with upc, which would mean the fixed phone line would be dropped. so what i need to figure out is how do i connect upc phone to eircom panel without needing to involve eircom or do i have to get them involved or what is the best way to go about this? is another option to go with a different monitoring company? apologies if this has been asked before. thanks
altor wrote: » schmegeggin wrote: » hi all we currently have a wireless eircom phonewatch alarm with fixed phone line and looking at getting tv/broadband/phone package with upc, which would mean the fixed phone line would be dropped. so what i need to figure out is how do i connect upc phone to eircom panel without needing to involve eircom or do i have to get them involved or what is the best way to go about this? is another option to go with a different monitoring company? apologies if this has been asked before. thanks If you ring P.W they will tell you it wont work and wont monitor the alarm using UPC. They will try sell you a GSM, unless they can poll this forget about that option. A lot of people just get it changed and P.W still monitor the alarm with no problems. Strange enough as they say it does not work :rolleyes:
legalizblack wrote: » GSM unit is really good.it's not that easy to jamm. €149 covers the gsm and you don't have to top it up like others. Cheaper than paying line rental.
KoolKid wrote: » legalizblack wrote: » GSM unit is really good.it's not that easy to jamm. €149 covers the gsm and you don't have to top it up like others. Cheaper than paying line rental. I have seen numerous devices tested, they are extreemly east to jam. Jamming devices are very cheep as well, So much so burglars leave them behind to prevent digis dialling out once they have gone. If you are going to make such claims please back it up with some knowledge of their workings.
legalizblack wrote: » KoolKid wrote: » legalizblack wrote: » GSM unit is really good.it's not that easy to jamm. €149 covers the gsm and you don't have to top it up like others. Cheaper than paying line rental. I have seen numerous devices tested, they are extreemly east to jam. Jamming devices are very cheep as well, So much so burglars leave them behind to prevent digis dialling out once they have gone. If you are going to make such claims please back it up with some knowledge of their workings. I'm not saying they can't be jammed. Seen them tested aswell.you have to be really close to the control panel to make sure it works.doesn't really work from outside unless you have a pretty big one which doesn't really happen on a domestic break in.how many examples can someone give of an Epw jammed? Same system( Simon xt made by GE) is used in US aswell and I think they are more advanced in jammers and stuff.unless you are ready to spend about 3-4k on some better security system then ePW it's the best one out there at an affordable price
legalizblack wrote: » I'm not saying they can't be jammed. Seen them tested aswell.you have to be really close to the control panel to make sure it works.doesn't really work from outside unless you have a pretty big one
legalizblack wrote: » Unless you are ready to spend about 3-4k on some better security system then ePW it's the best one out there at an affordable price. This would include an external bell as well. How much do Eircom charge for that Optional Extra again??:rolleyes:
legalizblack wrote: » I think the fact that more than 130k people are covered by ePW says a lot.
legalizblack wrote: » at the moment I'm a sales rep for eircom phonewatch
KoolKid wrote: » Hmmm.. Just noticed this on another thread legalizblack wrote: » at the moment I'm a sales rep for eircom phonewatch An important bit of information , people should be aware of when judging what you are saying here. So , speaking as an Eircom rep,can you tell me does Alarm Monitoring work over UPC?
KoolKid wrote: » Another eircom rep and another lie. It does work. Please get some technical information before lying to people here. I think you will find users on boards less prone to your tales than the OAPs you are used to telling these lies to.
legalizblack wrote: » Dude, the fact that you clearly hate eircom and working with some other alarm company doesn't make you the only person that everyone should listen to Eircom is still the biggest one out there PW aswell so it doesn't really matter if monitoring works with UPC when Eircom doesn't do it
onlyme23 wrote: » Hi I'm really interested in this conversation, I have a PW Monitored alarm and eircom phone line, strongly considering changing to UPC, so where do I start, UPC have told me to contact phonewatch to get a GSM Unit? PW quoted me approx 200.00 , plus their monthly monitoring cost. If you could advise on a, what and how to maintain alarm system, and if it can be monitored if I opt for UPC package, phoneline, broadband.
KoolKid wrote: » Eircom won't do it for you. They will try & tell you it doesn't work so they can either keep your landline business or try to sell you a GSM dialler insted (Without informing you how easy it can be jammed) Heres how you can do it yourself . Get one double RJ 11 socket. 1 RJ 11 to RJ11 lead At the rear of the socket wire red/black from socket 1 to line in on the dialler & blue/yellow from socket 2 to line out of the digi. Connect RJ11 patch lead from Ph1 of the modem to socket 1 & plug the phone into socket 2. If there are other phone connections around the house these can also be connected to socket 2. If you are patching in existing phone sockets around the house make sure you disconnect the external line coming into the house first. Remember if the power goes off the line is dead. You can put a back up power supply or a UPS onto the modem, however if there is a power cut in the area there is a good chance UPC will be down anyway. And yes any licenced company can take over the monitoring of your alarm. Possibly at a better price as well so shop around.
KoolKid wrote: » Replacing the pair on the black cable with a feed from the UPC box will work. The only thing you need to check if its an older digi is that its using DTMF tone dialling & not pulse.
johnfás wrote: » Thanks very much for your help. Do you know how I can find what sort of tone the alarm box is using? The model is called a Vista 5. So basically I do the following? 1) Buy an RJ11 cable, strip one end of it and use some new of those gel connectors replacing all the wires on that black cable with those going to my RJ11.
johnfás wrote: » 2) Connect my RJ11 to my UPC box. 3) Probably buy one of these? http://www.ebay.ie/itm/Belkin-Active-Battery-Backup-400VA-240-Watts-20-Minute-Backup-Time-/110805361413?pt=UK_Computing_PowerSupplies_EH&hash=item19cc83a305#ht_500wt_1156
cord wrote: » Sorry...a question on the side, if I may. Will an alarm texter work with upc or do I have to go the go the GSM route?
cord wrote: » SecureWatch by HKC...I think