nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

Child Item

System Temps (cpu/nb/gpu)

Anti

It was brought to my attention that this might be a good idea for people to compare tamps. So Please post the setup and the temps idle/load

Find more posts tagged with

Quick Links

Comments

L31mr0d

CPU: Opteron 165
Stepping: CCBWE 0550UPMW
Cooling: lapped using a TT120 with a Sflex 1600rpm 12cm fan and AS5 as TIM
Clock: 2.7Ghz @ 1.375v
Idle: 38'c
Load: 48'c

Chipset: DFI Expert NF4 skt939
Cooling: TR05 -sli
Clock: FSB @ 300Mhz @ stock volts
Idle: 29'c
load: 42'c

GPU: BFG 7900 GTX 512MB OC
Cooling: Zalman VF900
Clock: 720Mhz core, 860Mhz mem
Idle: 40'c
load: 55'c

awhir

CPU: intel E6420
Cooling: Tunqi tower
Clock: 3.7Ghz @ 1.55
Idle: 30'c
Load: 56'c

Chipset: inTel p965
Cooling: TR05
Clock: FSB @ 450Mhz @ 1.3
Idle: 34'c
load: 40'c

GPU:evga ac5 8800gts 640mb
Cooling:stock
Clock: 630Mhz core, 1000Mhz mem
Idle: 54'c
load: 63'c

DirkVoodoo

Hmmm...Something not quie right with this Ultra-120. I think the new mounting clip, although easier to install, does not provide sufficient clamping pressure and so i'm not getting proper cpu-tim-hsf contact. Lapping and mod will commence soon...

CPU: Intel E6600
Cooling: Thermalright Ultra 120-Extreme
Clock: 3.15GHz @1.35V
Idle: 35C
Load: 54C

Chipset:Intel 965P
Cooling: Stock Gigabyte NB Heatsink w/ Akasa 40mm fan (modded on)
Clock: FSB @ 350 MHz @ +0.1V
Idle: 36C
load: 58C

GPU: Sapphire Radeon X1900XT 512MB
Cooling: Zalman VF900Cu
Clock: 621 MHz (Core) and 720 MHz (Memory)
Idle: 42C
load: - -

Anti

CPU: Opteron 170
Stepping: Unsure
Cooling: Alphacool Nexoss block polished
Clock: 2.85Ghz @ 1.5v
Idle: 21'c
Load: 35'c

Chipset: DFI UT DR ( Sli Mod ) NF4 skt939
Cooling: Aplhacool NF4 block
Clock: FSB @ 285 @ 1.3 volts
Idle: 20'c
load: 38'c

GPU: EVGA 8800GTX AS3
Cooling: Stock
Clock: 640Mhz core, 1100Mhz mem
Idle: 43'c
load: 70'c

barry181091

Anti,
Is 70c not a little on the high side, even for load, on a Gfx card ?

Barry.

awhir

nope they can go upto 90c and be fine.

70c load is good.

Anti

I hit 93 yesterday, the problem was there is about 3mm between my 8800gtx and the x-fi, so i added an akasa amber 120mm fan behind the card blowing air out the back of the case as the top of it is semi vented. Now the temps are down to 60c max on load. Also the pwm area was hitting 70c so i added another 80mm akasa amber to cool that area, now it dosent hit over 30c. So im all happy. Now to bring the chipset temps down. But atleast i can now go to 3.2ghz 24hour orthos stable with 320x10 @ 1.65v. That equated to 26 second 1M super pi, and 1,01 2M super pi.

Cuddlesworth

Might as well post up

CPU: E6320
Stepping: Unsure
Cooling: Vapochill XE
Clock: 3.1ghz @ 1.58v
Idle: -0'c(not sure)
Load: 15'c(26'c delta between proc and head)

awhir

krazy_8s wrote:

Might as well post up

CPU: E6320
Stepping: Unsure
Cooling: Vapochill XE
Clock: 3.1ghz @ 1.58v
Idle: -0'c(not sure)
Load: 15'c(26'c delta between proc and head)

jesus tought the 6320 would go higher then that under phase........

try 1.65

hopeful

Will add my 2 cents...

CPU: E6320 (mainboard Gigabyte DS3P rev 3.3)
Stepping: Huh?

Cooling: Scythe Ninja Rev B.
Clock: 2.80 @ 1.29v
Idle: 28c
Load: 48c (running Folding @ Home WinSMP client)
NB temp: 38c at full CPU load

100% stable...Uptime at full load currently 12 days and counting. Last reboot was for MS updates.

Cuddlesworth

awhir wrote:

jesus tought the 6320 would go higher then that under phase........

try 1.65

it does, getting a fsb higher then 450+ is the problem.

awhir

should of gone Intel ..............................

Chosen

krazy_8s wrote:

Might as well post up

CPU: E6320
Stepping: Unsure
Cooling: Vapochill XE
Clock: 3.1ghz @ 1.58v
Idle: -0'c(not sure)
Load: 15'c(26'c delta between proc and head)

When can I pass by to test my L632A beauty, which is shown here priming at 3600 with 1.375V under water?
Are you still in the neighbourhood (Cabinteely)?

Cuddlesworth

I don't really want to go through 2 or 3 hours of mounting again, the mount unit on the vapochill is missing a piece and was very hard to get contact between the cpu and head and still maintain a airtight seal.

You can have the vapochill in a month when I buy a new unit from the states.

TonyM.

CPU: QX 6700
Cooling:120 EXTREME 2 FANS
Clock: 3.3Ghz @ 1.375v
Idle: 41'c
Load: 51'c

Chipset: 68OI
Clock: FSB @1200Mhz {300 X 11}
Idle: 35'c
load: 45'c

GPU: 2 X EVGA 7900 GTX 512MB SLI
Cooling:STOCK
Clock: 650Mhz core, 800Mhz mem
Idle: 40'c
load: 55'c

papu

CPU: e6430
Cooling:Scythe ninja Silenx Ixtrema
Clock: 2.6 atm 1.35
Idle: 29'c
Load: 70'c ( i think somthings wrong here :P)

Chipset: p35
Clock: FSB @ 325 X8
Idle: 33'c
load: 46'c

GPU: Radeon Hd2900xt
Cooling:STOCK
Clock: 840Mhz core, 1000Mhz mem
Idle: 45'c
load: 72'c

any ideas whats wrong with the old cpu? as5 need time to settle of will i try reseat the ninja? it idles ok but loads are silly high

awhir

papu wrote:

CPU: e6430
Cooling:Scythe ninja Silenx Ixtrema
Clock: 2.6 atm 1.35
Idle: 29'c
Load: 70'c ( i think somthings wrong here :P)

Chipset: p35
Clock: FSB @ 325 X8
Idle: 33'c
load: 46'c

GPU: Radeon Hd2900xt
Cooling:STOCK
Clock: 840Mhz core, 1000Mhz mem
Idle: 45'c
load: 72'c

any ideas whats wrong with the old cpu? as5 need time to settle of will i try reseat the ninja? it idles ok but loads are silly high

try changeing the mounting clips(on extreamsystems) and resetting.

papu

Will dizzle! , will try friends ninja just to make sure its not borked :P

WillieDH

In speedfan what is Aux ? and Temp 1 ?

Running a Core2Dou 6600 Quad with Evo Blue Cooler

DirkVoodoo

Temp1 looks to be your Northbridge temp. Aux is just another sensor somewhere on your motherboard, knowing the model would help.

EDIT: Checks Willy's sig and quickly googles.

It seems that there is another temperature sensor next to the MOSFETs near the CPU, which is either your TEMP1 or AUX.

awhir

DirkVoodoo wrote:

Temp1 looks to be your Northbridge temp. Aux is just another sensor somewhere on your motherboard, knowing the model would help.

EDIT: Checks Willy's sig and quickly googles.

It seems that there is another temperature sensor next to the MOSFETs near the CPU, which is either your TEMP1 or AUX.

mosfeets are fine once they dont go over 60-70c

WillieDH

Thanks

TerrorFirmer

CPU: e6400
Cooling: Stock

Clock: 2.6Ghz
Idle: 29'c
Load: 60'c

Gpu: 8800Gts
Cooling/Clock: Stock
Idle: 57

Load: 70

requiem1

non overclocked temps

CPU: E6600
Setup: Dangerden tdx 775 block, double rad and single rad
Idle Temp: 22 degrees
Full Load: 35 degrees (12 hours orthos)
In my bedroom(Hot room)
Idle temp: 31 degrees
Full load: 40 degrees (12 Hours orthos)

GPU: 8800gts
setup: EK full cover 8800gtd waterblock
Idle: 35 degrees
Load: 41 degrees
Hot Room: increase in both idle and load by 2~4 degrees

DanGerMus

C2D E6700 @ 3.2ghz stock volts

core 0 idle 30 load 39-40
core1 idle 30 load 40-43
running folding at 100% on both cores
temps from TAT

GFX x1950pro 32 (no oc)

NB not sure using speed fan i get temp 1,2,3 @ 33,28,-1 respectively i'm assuming temp 3 is a dud and one of the others is te NB and SB?

Room temp is quite high not sure i'll check though i was gettin in the low twenties a while back.

sebastianlieken

happygandalf wrote:

NB not sure using speed fan i get temp 1,2,3 @ 33,28,-1 respectively i'm assuming temp 3 is a dud and one of the others is te NB and SB?

imguessing actualy that either temp1 or temp2 is ur Tcase(Thermistor on the heatsink of the chips between the two cores). Tcase is usually bout 10-15 lower than Tjunction(core0 and core1)

Bigchrome

CPU: intel E6600
Cooling: Piotres Stepper +DICE
Clock: 3.6@1.35v
Idle: -65'c
Load: -62'c

Chipset: Intel p975
Cooling: Stock heatsink +DICE
Clock: 400@1.85v
Idle: -20'c
load: -11'c

GPU:Sapphire HD2900XT
Cooling: SLI GPU 4.1
Clock: 940/1000
Idle: -68'c
load: -63'c

Yes, those are negative btw.

Hendrix89

CPU: Q6600 (G0)
Cooling: Tuniq Tower 120 / AS5
Clock: 3.50GHz
vcore: 1.39v (after vdroop)
Idle: 33-35C
Load: 67C

FSB: 389x9

NB Temp: 30C idle, load - no idea

GPU: BFG 8800GTS 640mb
Cooling: stock / fan @ 95% + PCI Exhaust fan
Clocks: 690/1620/985 (1970 effective)
Idle: 52C
load: 68C max

Ambient (case): 37C
Ambient (room): 22C

papu

CPU: E6420
Cooling: D-tek Fuzion , Laing DDC-2 , Swiftech MCR-220 w/2x120m Blue Led yate loons, Swiftech MCRES-MICRO
Clock: 3.40GHz
vcore: 1.47v
Idle: 25C
Load: 35-40C

FSB: 425x8

NB Temp: dunno

GPU: Club 3d Hd2900Xt
Cooling: stock / fan
Clocks: 820/1000/
Idle: 40C
load: 75C max

Ambient (case): 26C
Ambient (room): 20C

awhir

papu wrote:

CPU: E6420
Cooling: D-tek Fuzion , Laing DDC-2 , Swiftech MCR-220 w/2x120m Blue Led yate loons, Swiftech MCRES-MICRO
Clock: 3.40GHz
vcore: 1.47v
Idle: 25C
Load: 35-40C

FSB: 425x8

NB Temp: dunno

GPU: Club 3d Hd2900Xt
Cooling: stock / fan
Clocks: 820/1000/
Idle: 40C
load: 75C max

Ambient (case): 26C
Ambient (room): 20C

cmon get bump that chip up abit.