DIY Calving Cameras

https://www.boards.ie/discussion/comment/121824104#Comment_121824104

Screenshot_20240302_084612_nPerf.jpg

This is a speed test at the shed. Is it good enough do you think?

Interesting it has WiFi too, could be useful for changing between home-farm and out-farms.

https://www.boards.ie/discussion/comment/121819460#Comment_121819460

another one i came across

https://www.theverge.com/2024/2/27/24085151/anker-eufy-4k-lte-cam-s330-features-price

https://www.boards.ie/discussion/comment/121826266#Comment_121826266

It varies by manufacturer, some say as low as 1mb minimum others may be 5mb, but mobile/wireless speeds can vary significantly due to contention ratio, weather and other interference so you'd want to allow for that. I wouldn't be guaranteeing high reliability with 3G/4G unless speeds are consistently above 5mb.

https://www.boards.ie/discussion/comment/121824774#Comment_121824774

what would be the minimum speed needed at the camera do you think emaherx?

Obviously with frame rate turned way down if you can

https://www.boards.ie/discussion/comment/121824516#Comment_121824516

Sounds like a Reolink like the one linked by @pms7 is the simplest option so, the solar panel is optional but you may as well get it.

https://www.boards.ie/discussion/comment/121824516#Comment_121824516

https://reolink.com/product/reolink-go-pt-ultra/

might be different options, but this is one option

https://www.boards.ie/discussion/comment/121824489#Comment_121824489

Sorry, I should have said no power there either. It’s a temporary set up. I plan on installing a couple of solar powered lights there too.

https://www.boards.ie/discussion/comment/121824441#Comment_121824441

Is there power there?

You also have the option of getting a 4G or 5G router then you can use any PTZ camera and have the option of adding more cameras for watching livestock or security without needing multiple sims.

https://www.boards.ie/discussion/comment/121824104#Comment_121824104

Thanks. It’s an outside yard a couple of miles away so no WiFi available. Will have a look at Reolink options tonight.

https://www.boards.ie/discussion/comment/121823777#Comment_121823777

Download a speed test app - ookla or similar.

Reolink are popular for solar/battery powered cameras and have a PTZ 4G version.

I've two fixed Wifi ones here, they don't have as good a night vision as my wired cameras, (presumably to save power with less IR) but they are OK for small sheds.

If you are not far from house, would you consider a wireless bridge instead of one with a sim?

https://www.boards.ie/discussion/comment/121823630#Comment_121823630

Ya the reception is fine. Not sure on speed. How would I check that?

https://www.boards.ie/discussion/comment/121819460#Comment_121819460

are you sure you will have reception in the shed, what speed do you get on your phone there?

Apologies for asking the obvious on this thread but could anyone recommend a ptz camera run from a SIM card that would be suitable for a lambing shed about 70 x 40 feet.

https://www.boards.ie/discussion/comment/121819202#Comment_121819202

Cameras with P2P support will work with any provider without inbound connections. Your camera makes an outgoing connection to a remote server and you connect to that. I'm not a big fan of these types of services on cheap Chinese cameras but they work.

Personally I'd go with a cloudflare tunnel, but it requires another always on device such as a PC or Raspberry Pi. Works essentially the same as above but Cloudflare would be a more reputable company when it comes to internet security.

big_show

How are people getting around the likes of Three with their CGNAT? I.e. your router only has a private IP address so you are unable to use the likes of DDNS to connect directly to the camera? I've a mate looking to setup a camera but his router is getting a 10.* IP address. does anyone know if the cheap Tapo cameras work with CGNAT?

limo_100

Hi lads. I have just purchased a calving camera and I am having issues getting it to connect to the network it is a SIM card battery operated camera. I keep getting the same network connected message then it buffers and comes back it 4g not detected.

I got a world SIM card with the camera and I put the SIM card into my phone and turned on roaming and I am able to use this SIM card on my phone. Played YouTube make calls so SIM card is working in the phone anyway. Then I put my own SIM card into the camera and the Camera is connecting and working as intended.

When I put the camera sim back in I am back into the same cycle. Anyone any experience with an issue like this?

https://www.amazon.co.uk/dp/B07Z4R827X?psc=1&ref=ppx_yo2ov_dt_b_product_details

I've the same KuWIFi bridges. Out of the box they work as just a bridge, but if you login to them then you can setup the one at the shed to also be an access point. You should change the password as default is 6666666

They support 5Ghz only, so if you need 2.4 you can use your old routers as access points but will need to turn of DHCP and connect only to LAN ports. Don't use the WAN port as you don't want any routing.

ABitofsense

I bought 2 new Reolink RLC-523WA wifi cameras. The 4G router is struggling this year to run these (vs old Aliexpress 25e one i had previously).

I'm exactly 870m from the shed so i have a lot of trees and ditches to go through although shed is slightly elevated. I've bought these to setup a bridge which ill wire directly to the router but at the shed, can i connect to a router to bounce the signal around the shed (ive a number of different TP-Link 4G routers)? Or what do i need in the shed?

jimini0

I have a reo link 4k PTZ camera too from previous recommendations on another thread. Bought for €169. Great job it's solar powered and mains powered. I charged it full with the mains then connected the solar panel. Over the full month of lambing I only needed to plug it into the mains once to charge it to full again. I bought a three internet dongle on done deal. And got a three prepay sim card. Didn't have any trouble with it. I live 3 miles away from the shed. It saved me the unnecessary journeys up and down like previous years. Total cost for camera and dongle was €210 plus the months Internet @€20 a month. Well worth it

Simmental.

I have two Reolink RLC-823A PTZ cameras in separate sheds. The sheds are about 800m from the house with plenty of trees in the way so I use a wireless bridge using airMax m2 loco nanostations.

I have one nanostation plugged into the router in the house and the cameras are plugged into the two receiver nanostaions on the sheds.

The internet in the house isn't great (3mbs) but I never have any issues connecting to the cameras or moving them. The cameras have infrared lights for viewing in the dark but also have a built in led light that can be turned on in the app. You can save points that the camera will quickly move to when asked.

I normaly view the cameras on a phone or tablet but I also side loaded the app onto a fire stick to view them on the TV

You can get them on a few websites including amazon.

https://reolink.com/ie/product/rlc-823a/

https://eu.store.ui.com/eu/en/products/locom2

I found this video useful for setting up the nanostations

https://youtu.be/kQP6QNhNWUo?feature=shared

Screenshot_20231112_215650_Reolink.jpg

Screenshot_20231112_215709_Reolink.jpg

https://www.boards.ie/discussion/comment/121350281#Comment_121350281

Roughly looking at being able to run ptzs on half the ports available. Fixed cams not an issue. So 3 ptzs need the 8 port, but check specs as each one could be different. But multiple ptzs on a farm would be unusual. Currently installing 5 fixed in a sucker farm as layout didnt suit ptz.

Hikvision is more well known, this is an article giving an opinion on Hikvision v Uniview.

https://cctvdirect.co.uk/blogs/industry-news/hikvision-vs-uniview

I started using them as FreeTV were selling them very competitively. Bought a lot of stuff off FreeTV and find they generally sell good quality at good prices. Also went to demo/info meeting there given by Chinese guy from Uniview.

https://www.boards.ie/discussion/comment/121352577#Comment_121352577

Not significant enough to be an issue. Could be a big drop compared to local network speed if it's Gigabit speed but more than fast enough to stream multiple cameras, I've streamed 10 simultaneously over mine.

Considering most cameras will be relying on a cloud service anyway then the biggest bottleneck in rural areas will likely be the internet speed to the router.

Cheaper bridges will claim to achieve 300mbs max, better ones 1000mbs+ but real world setup if you can't achieve 100mbs then there is something wrong with the setup.

timple23

https://www.boards.ie/discussion/comment/121350729#Comment_121350729

Is there much of a drop in download/upload speeds over the wireless bridge?

https://www.boards.ie/discussion/comment/121350565#Comment_121350565

No, a wireless bridge is 2 identical devices they will need line of site to each other over large distances not so much over shorter. Generally one will be wired to the modem/router and the other wired to the devices at the shed.

Wireless links between the modem/router and bridge are not impossible but should be avoided if possible as it only adds more potential points of failure.

cosatron

do the wireless bridge need a line of sight to the modem?

@pms7 those cameras look good value to be fair, the OP should probably consider a switch with more ports as they stated that they want 2 cameras + PTZ now and more to be added in future.

I know you've installed a good few of similar setups at this stage, are the PSU's in those switches up to running multiple PTZs? or have you found any limitation on the combination of cameras v ports available? Max power output is likely shared across all ports so in theory with POE switches if there are enough larger devices (like the PTZ's) you could run out of power before running out of ports.

https://www.freetv.ie/2mp-ip-bullet-camera/

Hi,

yes recommend wireless bridge

currently installing similar system, 5 fixed

using these, good value

the ptz

https://www.freetv.ie/ip-ptz-camera/

poe switch

https://www.freetv.ie/4-port-poe-network-switch/

Tenda 01 can auto configure for wireless bridge.

If want I could configure and send package ready for install, I have a trade account with FreeTV.

Screenshot_2023-11-06-18-42-37-496_com.uniview.app.smb.phone.en.ezview.jpg

this is a screenshot from phone app, the 2MP fixed cam in total darkness