nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

Child Item

Slat Matts 2022

big big loader

Hi all,

Have a new 3 bay suckler shed just finished. i need to put slat matts down - for heavy suckler cows. Ive seen several old threads here on slat matts going back the years. Have got quotes from Comfort, Easyfix and Mayo Mats. The comfort ones by a good bit the most expensive - but from what ive researched may be the best for heavy suckler cows. Easyfix seem to cover the slat holes a bit more and may leave the stcok dirtier - which isnt ideal for suckler cows/calves/scours. Any thoughts from those in a similar situation that may have bought either??

Find more posts tagged with

Quick Links

Comments

minerleague

Have easyfix here good no of years, good grip for cows, not the softest but still look the same now as when they went in. cattle stay clean as long as you have pens fairly well stocked. Concreted toe area near feeding barrier to stop them lying there ( instead of flat mat easyfix supply ) I think easyfix now do a mat that slopes more to either side to let water away quicker. ( dont have calved cows in shed so cant comment there )

minerleague

https://www.boards.ie/discussion/comment/119642027#Comment_119642027

No, the wedges on slat mats are very tight ( had to drive them with sledge ) and concrete is a small bit above the level of the mat (edit to say concrete put in after so to get good depth ended a small bit above mat ) . At the back of the pens I put the flat mat sections on the 18" of bare concrete and never put the screws supplied with them and dirt sometimes gets in at a joint alright

Fine Day

Comfort mats here for the few years. Find them a good job and I did a few more pens this year. Have no experience with other brands. There is pros and cons for every brand I'd say. All down to your preference and requirements. It's a long term investment so I would put the time and effort into researching them. A few different companies at the ploughing this week so plenty of options.

Sami23

Does anyone have the newer type Easyfix Mats with the sloped curved surface under suckler cows.

How do they compare to the older flat Easyfix Mats in terms of slippyness and cleanliness of the Cows ?

Ordering some next week but unsure which type to go with.

Tia

Cavanjack

https://www.boards.ie/discussion/comment/119679400#Comment_119679400

Talk to one of the reps. I’m after putting in a couple of pens of the curved ones. He said they were best for finishing animals. He will advise.

Sami23

https://www.boards.ie/discussion/comment/119679473#Comment_119679473

Yeah I had the rep out alright to measure up and he said people are putting in both types and it's down to personal preference.

He did say the newer ones would definitely be a bit slippery than the originals but loads of people are using them so I was hoping to get opinions of people that are actually using them.

Presume you don't have cattle on yours yet

Conversations 3

Anyone use Durapak mats?

Spoke to them at the ploughing and they seemed to be a good crowd, not sure on price yet.

Cavanjack

https://www.boards.ie/discussion/comment/119679620#Comment_119679620

No cattle on them yet. It’s finishing bulls that’ll be going in it. The older ones are a safer bet if you are still unsure when buying them.

Sami23

https://www.boards.ie/discussion/comment/119679727#Comment_119679727

Yeah I'm leaning that way alright but just think they'd be a lot cleaner on the smooth ones 🤷‍♂️

leoch

Wat price are they

Sami23

https://www.boards.ie/discussion/comment/119680451#Comment_119680451

Looking like €1100 plus vat per bay for 11'6" slats

Sami23

https://www.boards.ie/discussion/comment/119681535#Comment_119681535

For me it's mainly down to animal welfare as its not easy looking on to see suckler cows near calving struggling to stand up due to slippy concrete slats.

Cavanjack

https://www.boards.ie/discussion/comment/119681535#Comment_119681535

I worked it out like this.

they say It’s an increase of 11kg carcass weight over 120 days. I’d suspect with bulls this may be higher. Many lads finishing bulls run a couple of lots through the shed every year.

So 11kg by a pen of 7 two times a year is 154kg extra per pen @ €4.5 is €693. 2 years should pay for them at that rate.

Gudstock

https://www.boards.ie/discussion/comment/119679676#Comment_119679676

Any reviews or experience with the Durapak mats?

Conversations 3

https://www.boards.ie/discussion/comment/119683507#Comment_119683507

I can only find the info on their own website, I'll contact them and get a quote anyway.

http://www.durapakagri.ie/products/durapak-slatted-rubber

mr.stonewall

https://www.boards.ie/discussion/comment/119683806#Comment_119683806

If they wanted to make them compulsory we would have seen grants to encourage the install in new shed and also for retrofitting Bigger problem is to get farmers to check the condition of slats. New Tams will be interesting to see it they included. The only way I can see them allowing grant aid on mats is if you install new slats

minerleague

https://www.boards.ie/discussion/comment/119683507#Comment_119683507

No experience but they cover 3 slats compared to easyfix 2. every second gap in slats is free of any wedges then with easyfix

Cavanjack

https://www.boards.ie/discussion/comment/119683806#Comment_119683806

Their trial was bullocks over 120 days. This winter the finishing period could be halved to 60 days in a lot of places.

Fine Day

https://www.boards.ie/discussion/comment/119684867#Comment_119684867

Tell me more please on how I can half my winter finishing period. I am cautious on finishing cattle this winter with the high input cost and what way the market will be next March.

Cavanjack

https://www.boards.ie/discussion/comment/119685056#Comment_119685056

You’ll halve it by only feeding them for half the time. They’ll not be properly finished obviously.

I’ve heard of a few lads that are letting bulls off as soon as they’ve any sort of cover on them at all (after 40-50 days).

As for bullocks it’d probably be time to get rid of as soon as they hit 2+ if feeding inside.

Fine Day

https://www.boards.ie/discussion/comment/119685243#Comment_119685243

I don't know if I would go that route. I'd carry less and finish them well before I'd considered that. Maybe I am just old school but I feel it's a sin killing cattle that are not fit. I know we are in different time but that's half doing a job in my opinion.

Cavanjack

https://www.boards.ie/discussion/comment/119685369#Comment_119685369

Bulls would be ok at 2- I’d say but they’d grade and kill out better with more flesh on them

DBK1

https://www.boards.ie/discussion/comment/119679473#Comment_119679473

Hi Cavan, just wondering how you found these mats after a year with them? I rang Easyfix today for pricing and a rep is to ring me back later. I’d be interested to get your opinion on them. Thanks.

tellmeabit

Did you get a quote after?

Cavanjack

https://www.boards.ie/discussion/comment/121346383#Comment_121346383

Yeah happy enough with them. Done another 8 pens this year. Thought cattle done well on them and were clean enough. Only issue is when moving cattle on them they can be slippy but happy out with them.

DBK1

https://www.boards.ie/discussion/comment/121346845#Comment_121346845

Thanks Cavan, would you prefer them over the standard Easyfix or is there any difference?

DBK1

https://www.boards.ie/discussion/comment/121346599#Comment_121346599

Just got a call from the rep in the last few mins.

€7,000 plus vat to do a 3 bay 16’6 slat with a 4 foot toe area both sides of the slat being matted as well.

tellmeabit

Easy fix quoted approx 1300 per Bay for 11'6 and 1 foot toe area

mr.stonewall

Comfort mats at the ploughing were €1300+vat a bay for 11ft 6 slats no toe area. A pro for no mat in the toe area is to keep the hoofs harden up a bit

Cavanjack

https://www.boards.ie/discussion/comment/121346871#Comment_121346871

I’d say they are a bit cleaner and there might be more lasting in them. There is plenty of meat in them where as the standard ones that are in 10 years are in good condition but the grips are starting to wear.

Ive half the sheds done at this stage and hope to do another 3/4 pens a year until they are all done. I have in in my head m for some reason that for finishing sheds I’ll keep using the curved ones but maybe for sheds that I’d usually have store cattle in I’d put in the standard ones.