nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

Child Item

NOS 17" CRTs For Sale

dav09

ITEM: NOS CRT 17"

POST\COLLECTION: Delivery(Maybe)/Collection

PRICE: €60

PAYMENT METHODS: Cash/Paypal/Bank Transfer

Hi Folks, I bought a bulk load of brand new CRTs recently for a bit of a steal so am selling off some cheap as I don't need 80+ CRTs! Happy to offer them here to the community for roughly cost price if people are interested. Costing Me 12 for tubes, 19 for chassis, then about 16ish for shipping to here and 8ish for a few bits bits needed for them like the connectors, leaving myself about 3 or 4 euro as usually something unexpected comes up like missing parts or oversized pallet fees or faulty stock when buying something like this being realistic, might even be leaving myself a bit short but hopefully not. So I'm going to say €60 all in. They'd fit nicely in any 19" cabs if you adjusted the mount or some mounts will take them as is, or maybe PVMs or other uses, these are likely some of the last of the NOS CRTs produced by the sounds of it from the Intervideo Bankruptcy so this might be your last chance at getting your hands on these and could be the last bulk shipment of these coming into Ireland, hence why I grabbed them.

Sale price is cost price for me which I'm going to say will be €60, I don't need anywhere near 84 of them! Price might vary if for some reason I get hit with something massively unexpected but probably not. Would be happy to see 30 or 40 or more of them go to the community here and I know a few people here have asked me for them over the past few years, if not enough interest I'll probably try flog them elsewhere. I can maybe post them but would rather not, maybe a group collection might be possible for those in Dublin or something? Might consider a trade too for parts or cabs if someone wants a few of these.

Some specs, Curved CRTs, 220v in (so Irish voltage should be fine), 15khz as far as I know, comes with remote board and pretty much everything needed, think the connector kit includes power and video signal connectors.

I don't need a definitive yes yet, but if you're interested just let me know how many you'll take. Payment will be needed when they arrive so probably sometime in August but will try to work with people.

List of potential takers:

Colonel Panic 1x (mentioned on different thread)

Inviere 2x

Optimus Prime 2x

Jack Burton 5x

CathalDublin 1x

Find more posts tagged with

Quick Links

Comments

Colonel Panic

@dav09 - I’ll send you the money by PayPal this evening. Thanks for sorting this!

dav09

No prob and thanks!

Jack burton

Would I be able to reduce my amount to 4 instead of 5. Was supposed to get one for someone that hasn't the need anymore.

dav09

All good, that's no problem thanks! Can either post of arrange something else if you want to collect or maybe meet somewhere, send me a DM if you want thanks.

Colonel Panic

I can't seem to create PMs right now (😅), so posting here - Payment sent and happy to chip in for fuel and meet you somewhere convenient around Dublin.

dav09

Perfect, recieved it thanks 😀

dav09

Will start shipping next week and will try get as many as possible to people as soon as I can

Inviere

Minty fresh, very generous of you to donate that OutRun DX to me too @dav09, what a treat...

dav09

No prob, glad someone finally took me up on the buy 60 CRTs get one clapped out Outrun Dlx offer 😀

80s Synth Pop

Dave I sent the paypal the other day.

Does anyone have a source for suitable frames? I've a few frames here but not sure if they are small enough.

Inviere

https://www.boards.ie/discussion/comment/119492696#Comment_119492696

Also interested in this question, or bartop options for them even

dav09

Thanks folks. There should be some suitable frames for them I can even ask supplier, I'm sure one could be made fairly easily too.

Also I suppose to to be clear for everyone else, what's in the photo above is what's included. So unfortunately doesn't have a frame and also doesn't have input/ power wire but most cabs should have them already, or could be just soldered on anyway, I believe they are on ArcadeArtShop for cheap. If anyone is not happy with that and wants to cancel let me know just want to make sure they're 100% on what they're receiving thanks.

[Deleted User]

Are there any chassis left over from this deal? I could do with some, especially if there are medium-res Intervideo chassis available.

dav09

I should have some spare, some more chassis are due to show up so might be a few weeks before I have spare chassis. Maybe @BGOllie knows if they do medium red if you had time to test the multi sync chassis yet?

Also @80s Synth Pop kindly has offered me his spot for me to drop tubes and chassis off, does this suit everyone? Near Newlands Cross. Will aim for later this week but will give a bit of notice thanks.

[Deleted User]

https://www.boards.ie/discussion/comment/119506482#Comment_119506482

Thanks. I have a faulty Intervideo chassis in Silent Scope, which is 21" medium res, so a replacement for that would be very handy. Collection won't be a problem.

dav09

Heading to Dublin tomorrow, apologies for the delay it's been a busy few weeks. Hopefully @80s Synth Pop is around and I can drop some off there to be collected if that suits most people?

Thanks

Explosive_Cornflake

Are any of these remaining? I can collect if 1 is still available.

dav09

Yep no problem still a few left, collect from Limerick or Dublin?

fmul9798

Thank you very much @dav09 and thank you very much to @BGOllie for being so kind to collect them and hold on to them until I picked them up today. It was amazing to see your collection and projects @BGOllie , just wow. The children are already annoyed with my ranting about it... Special thank you for the bits which shall end up part of a cabaret..

Explosive_Cornflake

https://www.boards.ie/discussion/comment/119604968#Comment_119604968

Thanks! I can collect from Dublin no problem.

dav09

Perfect I'll leave one for you at @80s Synth Pop place as that's where everyone seems to be collecting them from, not too far from the Red Cow. I'm doing to drop off tomorrow so can take PayPal or Revolut whichever suits.

80s Synth Pop

Cheers Dav09 for delivery :D

They are here ready for collection lads. Send me a message to arrange collection. 2 mins from Newlands Cross by car.

The power and video connectors are the same as hantarex mtc9110 and you will need these cables separately. If you are making up the cables you will need:

Video connector 6 way: https://ie.rs-online.com/web/p/wire-housings-plugs/5091663

pins to crimp: https://ie.rs-online.com/web/p/crimp-contacts/6689381

If connecting to a groovymame pc, just cut the vga cable and crip on to the above for red green blue hsync vsync and gnd pins.

Power 3 way molex: https://ie.rs-online.com/web/p/wire-housings-plugs/6704001

And pins to crimp to a standard power cable/plug for power: https://ie.rs-online.com/web/p/crimp-contacts/7978720

Not sure if these need an isolation transformer or if you can connect straight to mains? Still have to read the manual.

These will go into an arcade1up if you extend the back a fraction. That's my project anyway.

Thanks again Dav09!

dav09

Thanks again and hope everyone enjoys! Really looking forward to seeing what everyone can do with them! Really glad I got them in the end and glad we all could enjoy them.

So I recently got a Paperboy which I managed to haggle down a lot due to the chassis in it not being a wells gardner. Turns out coincidentally it's the same as the regular intervideo chassis that came in the shipment above, I'm not sure exactly how they did it but they are definitely modifyable to make them work on medium res as asked above. Whether it's just a pot or something else I'm not sure. Also the tube is 20" on the Paperboy and it drives it no bother too.

CathalDublin

Ah crap, I missed the Dublin run, been a busy few weeks here

dav09

https://www.boards.ie/discussion/comment/119622184#Comment_119622184

I left one there for you! Just give a shout to @80s Synth Pop I knew you wanted it so left it in there as it was easiest for me, thanks

Inviere

Collected mine today, thanks a mill dav09 and 80s Synth Pop (and indeed for the very thoughtful parts list above).

Optimus Prime

I’ll grab my two on Saturday if that’s ok if you are around ? Thanks again for organising this, dropping and storing !

CathalDublin

Deadly, I’ll revolut you and sort out to collect from him over the weekend

dav09

https://www.boards.ie/discussion/comment/119623600#Comment_119623600

There's no panic with it glad you can get sorted with the monitor

80s Synth Pop

Hi all, anyone left to collect just drop me a message and I'll send you the address & phone number. They are available to collect any time.