nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

Child Item

Run out of carb drops and it's bottling day!

murdog!

I'm new to this game, just about to bottle my second batch and I've realised I only have enough carbonation drops for half the brew!

So, should I:

A) Bottle the half and wait for the carb drops to arrive? (should be with me on Monday/Tuesday)

Leave the full brew in the bucket until the drops arrive and bottle then?

C) Bottle today and use normal sugar for the second half?

Advice greatly appreciated!

Find more posts tagged with

Quick Links

Comments

BeerNut

Just use sugar. That's all carbonation drops are. It's a good opportunity to experiment with doses if you mark what's in each bottle.

murdog!

Thanks, how much sugar are we talking per 500ml?

Hingo

1/2 - 3/4 tsp. will do the job. if the style requires high carbonation (like a Belgian or Weiss) the higher side of that scale would work better.

murdog!

That's great thanks, off to the shed!

hatrickpatrick

Would ye just drop a teaspoon of sugar into each bottle and then bottle as normal? All the guides I found online talked about making a sugar solution in a container of water, which would have involved an extra round of sanitising, rinsing etc and then having to measure proper amounts etc. Carb drops seemed a simple alternative to this but if you can just drop a teaspoon of ordinary white or brown sugar directly into each bottle, that's easier still...

monty_python

hatrickpatrick wrote: »

Would ye just drop a teaspoon of sugar into each bottle and then bottle as normal? All the guides I found online talked about making a sugar solution in a container of water, which would have involved an extra round of sanitising, rinsing etc and then having to measure proper amounts etc. Carb drops seemed a simple alternative to this but if you can just drop a teaspoon of ordinary white or brown sugar directly into each bottle, that's easier still...

That's why I use carb drops. Can't be arsed with the extra work making the sugar solution and making sure it's through mixed in with oxadizing the beer would be a pain

mordeith

Just use a small spoon. If you can use a clean piece of paper to act as a funnel. Otherwise it can be hard stopping the sugar spilling around the top of the bottle

jamesbil

I used to use a spoon in each bottle but it's never very consistent. Each bottle will be carbonated slightly differently.

Now I just scald a small pan out with boiling water and disolve the correct ampont of sugar in a small amount of water, (200ml) I add this to th ebeer when I transfer it to my bottling barrel.

aaronm13

Batch priming is far more consistent and requires very little effort. The better carbonation results far out weigh the extra work as long as you have an extra bucket.

Bogwoppit

Lads, if you haven't started batch priming then start now, best method by far.

ferg44

I've been using the 3/4 tea spoon of sugar / bottle for 3 years, no problems.. can be bubbly if you use too much , but I hate a flat beer..
for Cider I always add a v full spoon full to keep it carbonated ..
I did the batch priming a few times , I keep meaning to do it again but Im just in the habit now of using the sugar ..
use extra for cider though

s3rtvdbwfj81ch

I use DME to batch prime.