Zardoz wrote: » I have had no video or audio issues . I use the video.elf file from a HDMU image ,I find the picture better on my plasma .The Hyperion video.elf file gives too dull an image ,the gamma is far too high. I just tried v2.2 of the History zap selector,that's the latest one but it causes the box to hang when activated.
topper1978 wrote: » I haven't tried the RTE plugin as it runs better off the TV. History Zap Browser doesn't work for me either. I used the Simple HD skin with now issue. Have you had any video or audio problems? I seen users post that they replaced elf files on previous Hyperion images. I've only used it for 2 days but did notice some HD channels get a little juddery but it could have been transient. I haven't used the image long enough to say for sure.
Zardoz wrote: » Just checked ,it shows it for me. To update on v5.5 ,I'm finding it quite good ,it definitely uses less memory ,but I can't iron out a few issues. 1.RTE Player will not work on it 2. History Zap Browser doesn't work 3. The Now epg isnt shown on the channel list when using the PLI skin
topper1978 wrote: » Have you noticed on recordings when scan forward it doesn't show you the speed, or is that just me?
Zardoz wrote: » So far I'm not overly impressed with 5.5. I haven't been watching much tv lately though . I thought 5.5 would have less memory use but it doesn't seem to . RTE player does not work on it and zap history browser doesn't seem to be compatible either. I had an issue with the front display stuck on boot after I installed the vfd fix but that seems to be resolved now. I'm not really seeing any performance improvement over 4.5 so far and Hyperion havent even included basic things like the service named picon renderer fix or amixer audio boost .I had to add alot of these fixes in manually. Id hold off on upgrading to 5.5 until I can overcome a few issues with it.
deezell wrote: » Did you check setup/system/hard disc/ recording paths to make sure time shift is recording to HDD.
Tuesday13 wrote: » Any ideas here folks as to where I can verify permanent timeshift is enabled? Doesn't seem to kick in at all or when I changed channel. Does anyone know where the permanent timeshift files are stored actually? I can compare to my other box.
Tuesday13 wrote: » Yeah permanent timeshift. Checked under setup/system/user interface and everything looks fine(I compared all options here to my other E2 box and everything matches up, timeshift works on the other box). Anywhere else where Permanent timeshift needs to be enabled? Drives are mounted ok as I often record on the box.
flashinthepan wrote: » Yep you could always try it with the edission on or off See if you can reproduce it as the edission should amplify the signal if its switched on
deezell wrote: » After that it can be an issue with feed to the second tuner. Cross uses the 2nd tuner if it's configured to tune in epg TP. If you have only one feed or a faulty feed it can't tune the TP for the data. If you have two cables check your cables individually in tuner one then 2 to see if they are both working. If you have only one make sure tuner c is disabled.
flashinthepan wrote: » yep 62% is not great for RTE Also by any chance were you using mobile data on your phone to stream or were you on your wifi as could it be poss 4g interference from the phone
deezell wrote: » Thanks. I'll have to put the thinking cap on. Maybe tomorrow.
flashinthepan wrote: » Just tried that there now Watching RTE2 Check signal level 99% stream bbc 1 Check rte signal again 99% no issues using info button on remote using hyperion 4.5 on amiko alien2
deezell wrote: » Here's a really odd one. While watching terrestrial rte2 hd rugby yesterday, I flicked on a stream on the phone to keep an eye on the Leicester city match, as you do. The RTE image on tv froze, followed by tune failed message. A quick press of the info button showed signal strength had dropped to 36% from 62% which I know is marginal enough to begin with. Cutting the stream restored the TV and signal strength. It's like the terrestrial tuner lose its mojo when I invoke a sat tuner. No issues when watching and streaming 2 sat channels. I could also watch/ stream rte2 simultaneously no problem. It explains why I've lost some terrestrial recordings half way through as I probably streamed a sat channel while the recording was in progress. Can anyone check their info on live viewing rte2 hd terrestrial while streaming a different channel and see if signal level drops?
flashinthepan wrote: » I thought timeshift was part of the image and not a separate plugin If what your talking about is permanent timeshift (for rewinding ) you would enable it in setup/system /user interface It is part of the image on hyper 4.5 that I have and don't remember installing it separate
wellboss wrote: » Yup I have it enabled and even tried downloading direct from "Open Tv Providers" and when i go to "Info about database" it has channel count 0 and no info in it No idea what I am missing. Saving path to my usb is set up in config menu, I think my sources are correct but it appears not to be downloading anything. The downloader is done very quickly when I try to get info Also got the RTE sorted, cheers
deezell wrote: » Have you the right source of epg data selected? open Tv providers/ Sky open Astra 28.2 ?
wellboss wrote: » I have done that and it's now linked to the USB as previous and now it opens the downloader at the bottom of the screen, says starting downloader for about 20 sec, then saving data and converting data. Great i thought but then there is no data in my EPG fields Any idea what could be causing it not to load?
deezell wrote: » If you've reinstalled CrossEPG check that your path to your HDD or USB for storage is still correct. In CrossEPG configuration you select the path by putting the cursor over it and pressing left/right arrows. It should cycle between HDD, USB and Flash memory. You may need to turn automount on to make your USB visible. When HDD shows without a disk attached it is usually mounted to the flash memory, not good. Try deleting the mounted HDD. reboot. Remount the USB if it doesn't show automatically from a reboot. Read back further here a few weeks (or search) to get the fixed version of RTEPlayer and how to pop it in.
wellboss wrote: » Hi, Just looking for some advice, cant find any clear solutions on the net but apologies if it's already been covered. My cool TV guide was needing an update as I couldnt access my EPG, it was directing me to a website but it doesnt exist any longer. I ended up uninstalling and reinstalling the plugin and it started letting me back into my epg, i reinstalled crossepg downloader also but now its not populating my epg correctly and when i click on the crossepg downloader plugin directly I get an error "Cannot open crossepg database" and then crashes with the green screen When i go to system and crossepd -> configuration it doesnt bring up my usb stick, just HDD (even though i dont have a hard disk attached), i know from looking at this previous it usually shows the name of the stick. Any Idea how to change access to the USB stick when its not in configure. The stick is mounted and I can record to it no problems Is there an alternative to coolTv as i believe there is no development on this now Also where do I get the rte player plugin as it also keeps crashing my box, worked fine ages ago so may need an update Hope somebody can help
flashinthepan wrote: » you could try this one insteadhttp://satellites-xml.org/ Go into custom and pick the sat you want
<sat name="Astra 2E/2F/2G (28.2E)" flags="0" position="282">
<sat name="Astra 2C/2E/2F/2G/Eutelsat 28A (28.2E)" flags="0" position="282">
