nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

Child Item

Netgear D6200 setup for Eir Fibre

BuckyBKatt

Hi everyone,

I am trying to setup my Netgear D6200 instead of using the supplied F2000 from Eir.

I cannot get it to work, so am looking for help.

So far have the following settings:

INTERNET SETUP
Does your internet connection a login: YES
Encapsulation: PPPoE (PPP over Ethernet)
Login: eir <at> eir.ie
Password: broadband1

Internet IP Address: Get dynamically from ISP

ADSL SETTINGS
Multiplexing Method: LLC-BASED
VPI: 8
VCI: 35
DSL Mode: Auto

WAN SETUP
Use VLANID: 10

Find more posts tagged with

router

netgear

fibre

eir

d6200

Quick Links

Comments

ED E

Won't work. You bought an ADSL2+ modem but are subscribed* to VDSL2. Incompatible.

Your options are bridge so its Eir->F2000->D6200 or return it and buy something suitable (Only a few VDSL2 modems will work).

*Unless you have Eir VOIP and have ADSL but still get an F2000

BuckyBKatt

Thanks for the response ED E, It a router i have hanging around a while and only recently moved from UPC to Eir......

Anyways, would you recommend any particular wireless router.
NETGEAR Nighthawk AC1900 i am thinking of getting.

ED E

If you were using it as a wireless AP with Virgin then I'd just to the same with Eir, its a perfectly capable device for wireless.

bobman1

Hi ED
I'm having similar problems with a Netgear D7000 modem router that I just bought. I can't get it to connect. Have spent hours at it and I can't get the internet light to come on. The only tip I have picked up on the forums tonight is the vlan setting and I don't think I have enabled this - not sure if this is critical?

Really hoping I haven't bought an incompatible device - PC World said it was suitable for Eir and spent a lot of money on it !! The F2000 is crap. Have had 3 of them in the last 2 weeks.

Any advice appreciated
Cheers bobby

ED E

VLAN most likely is critical, the exchange should drop untagged packets (yours) under normal configurations.

1%2858%29.png

Clicking the checkbox (default of 10 is correct) and reconnecting should be enough.