nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

Child Item

engin problems

liamo333

having a bit of trouble starting my engin. any tips?

Find more posts tagged with

Quick Links

Comments

g5hn710m4xpdwy

is it pullstart? dod you replace the glow plug? etc etc
thats very vauge but im sure there will be someone that will trell u everythin

vectra

What model is it ?
engine make ?
a few more details would help.

coolwings

Did you say you had planes last time?
If so here is the manual for an aircraft engine which has a good section on how to start such engines.

dts

If it’s a pull start with a primer, prime the fuel until it reaches the engine. If there is no primer then put your finger over the exhaust and pull the pull start until the fuel reaches the engine.
If the pull start gets hard to pull you have too much fuel so loosen the glow plug half a turn and try again. Once the engine starts then use then tighten the glow plug back down.
Hope this helps