roller shutter door schematic - boards.ie
Boards.ie uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Click here to find out more x
Post Reply  
 
Thread Tools Search this Thread
08-03-2013, 18:05   #1
kelledy
Registered User
 
Join Date: Feb 2013
Posts: 96
roller shutter door schematic

would anybody have a link 2 a diagram for a roller shutter door including two contactors , mechanical lock and limit switch.

basically a forward revers schimatic

thanks
kelledy is offline  
Advertisement
08-03-2013, 19:00   #2
JustRoss23
Closed Account
 
Join Date: Nov 2012
Posts: 1,504
ah phase 6 plc i am almost sure we covered this. i will have a look and upload if its what your after
JustRoss23 is offline  
08-03-2013, 19:24   #3
kelledy
Registered User
 
Join Date: Feb 2013
Posts: 96
yes it was even covered in ph 4 and dat would be better for me as there is no plc .. i have a fair idea but id rather a guide so i can just fire through it .. thanks
kelledy is offline  
08-03-2013, 20:08   #4
Davy
Category Moderator
 
Davy's Avatar
 
Join Date: Apr 2007
Location: Ireland most of the time
Posts: 15,177
Quick search popped this up, if its any use
Davy is offline  
08-03-2013, 20:10   #5
JustRoss23
Closed Account
 
Join Date: Nov 2012
Posts: 1,504
Spot on cheers davy
JustRoss23 is offline  
Advertisement
08-03-2013, 20:48   #6
m.j.w
Registered User
 
Join Date: Nov 2007
Posts: 1,443
Quote:
Originally Posted by kelledy View Post
would anybody have a link 2 a diagram for a roller shutter door including two contactors , mechanical lock and limit switch.

basically a forward revers schimatic

thanks
Is it an electrical interlock your looking for? The diargram above is the mains circuit for forward reverse but you will need a control circuit diagram for the electrical interlock and limit switches. The mechanical interlock is just the little yoke you put between the two contactors
m.j.w is offline  
08-03-2013, 20:51   #7
JustRoss23
Closed Account
 
Join Date: Nov 2012
Posts: 1,504
come on mjw hope it out of your notes mate
JustRoss23 is offline  
08-03-2013, 20:55   #8
m.j.w
Registered User
 
Join Date: Nov 2007
Posts: 1,443


Theres the control circuit there but it doesnt have the limit switch. The limit switches can just be wired through a n/c in series after each of the push puttons.
m.j.w is offline  
08-03-2013, 20:59   #9
m.j.w
Registered User
 
Join Date: Nov 2007
Posts: 1,443
Quote:
Originally Posted by JustRoss23 View Post
come on mjw hope it out of your notes mate
haha my notes were in the bin once i got my results
m.j.w is offline  
Advertisement
08-03-2013, 22:54   #10
Bruthal
Registered User
 
Bruthal's Avatar
 
Join Date: Oct 2008
Location: The edge of insanity
Posts: 10,782
Quote:
Originally Posted by m.j.w View Post


Theres the control circuit there but it doesnt have the limit switch. The limit switches can just be wired through a n/c in series after each of the push puttons.
Also, on shutters the hold on contact would probably be left out on the downward control, so if the REV button was for shutter down, K2 would be left out so the down button would have to be held in to close the shutter.
Bruthal is offline  
09-03-2013, 07:42   #11
Bruthal
Registered User
 
Bruthal's Avatar
 
Join Date: Oct 2008
Location: The edge of insanity
Posts: 10,782
A lot of roller shutters are single phase as well, needing just a phase to either the up or down switch wire of the motor.

The control circuit will be the same as above, and the power circuit similar, except one contactor or relay switches on the up feed, and the other the down.

They are simple circuits anyway, once an understanding of exactly what is happening is gained.
Bruthal is offline  
Post Reply

Quick Reply
Message:
Remove Text Formatting
Bold
Italic
Underline

Insert Image
Wrap [QUOTE] tags around selected text
 
Decrease Size
Increase Size
Please sign up or log in to join the discussion

Thread Tools Search this Thread
Search this Thread:

Advanced Search



Share Tweet