Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Vacant, Irelands biggest indoor airsoft site, Naas.

2»

Comments

  • Registered Users Posts: 80 ✭✭CQB Airsoft


    G-spec wrote: »
    Brilliant gaming last night guys. Had an epic evening.

    Thanks for that Gary, that bomb tug of war game was great craic me thinks.


  • Registered Users, Registered Users 2 Posts: 711 ✭✭✭Spooky-Vinny


    Hey everyone!

    Tomorrow vacant is holding a charity airsoft day for Childreach International. I hope you all can make it down to support a good cause.
    and Don't forget to invite your friends :)

    -Vinny xXx


  • Registered Users Posts: 258 ✭✭thegrayson


    Hey, I was up with you guys last weekend and had the AUG that choron'd at 339fps. I checked it this week with two Chronos in Galway and visited Airsoftguns in Limerick where I purchased it, they also checked it with their chronos. With the hop-up off we weren't getting more than 328. It was consistently between 320 and 328. To test it out we oiled the hop-up and were then able to get up to 350 but only for a few rounds until the oil cleared out, then it was back below 328. We put two hi-cap mags of bbs through it today and it is within the 1 joule limit. The chronos used were CED M2, Madbull USB Chrono 2, Competition Electronics ProChrono Digital, and one other.

    So I could change the spring as you suggested last week, but then it seems likely I would achieve 290 - 300 on other chronos in order to pass at 328 on yours. Any suggestions?

    BTW, thanks for having us last week, great craic, great site.


  • Registered Users Posts: 80 ✭✭CQB Airsoft


    thegrayson wrote: »
    Hey, I was up with you guys last weekend and had the AUG that choron'd at 339fps. I checked it this week with two Chronos in Galway and visited Airsoftguns in Limerick where I purchased it, they also checked it with their chronos. With the hop-up off we weren't getting more than 328. It was consistently between 320 and 328. To test it out we oiled the hop-up and were then able to get up to 350 but only for a few rounds until the oil cleared out, then it was back below 328. We put two hi-cap mags of bbs through it today and it is within the 1 joule limit. The chronos used were CED M2, Madbull USB Chrono 2, Competition Electronics ProChrono Digital, and one other.

    So I could change the spring as you suggested last week, but then it seems likely I would achieve 290 - 300 on other chronos in order to pass at 328 on yours. Any suggestions?

    Hay dude, we use two chronos. We use the Madbull and the x-cortex, It ofcourse is possible that the chrono gave us an incorrect reading but unfortunately all we can do is go by what we see on the screen.

    The next time your up ask for myself (Brían) and I'll chrono you personally on both chronos and we'll check it out but anytime it comes in as over 328 we don't normally have any wiggle room. Your best bet is not to have a gun that chronos to close to 328 because you'll always have problems on sites, chronographs in different sites give different readings and there is no overall standard for chronoing.
    thegrayson wrote: »
    BTW, thanks for having us last week, great craic, great site.

    Thanks for that dude, hope to see you again soon ;)


  • Registered Users Posts: 296 ✭✭IrishRatticus72


    That`s why I used to have a gun or two that you could hot swap the spring in under 5 minutes....... used to :(


  • Registered Users, Registered Users 2 Posts: 3,341 ✭✭✭Fallschirmjager


    Amazing weekend, large numbers and great players. Thanks to all those that attended.

    @Fallschirmjager, We will be building several firing ranges soon enough that will all be ran seperately from the site so he would be grand there.

    thanks a million gentlemen, i will give you a shout. have to prep him to be on his best behaviour first....!!

    thanks for this...


  • Registered Users Posts: 261 ✭✭kimmyt1987


    Airsoft Reloaded to me have always run THE BEST sites...
    And Vacant is no different!

    To anyone who enjoys the thrill and excitement of a little bit of CQB action, I urge you to try out Vacant if you haven't already! Great site, absolutely HUGE, great variety of gameplay, and THE NICEST lads you will ever come across! Even when I go up on my own I always find a friendly face for banter and abuse!

    Might see y'all Wednesday!
    Ill bring munchies :P :D


  • Registered Users, Registered Users 2 Posts: 3,224 ✭✭✭goodlad


    kimmyt1987 wrote: »
    Airsoft Reloaded to me have always run THE BEST sites...
    And Vacant is no different!

    To anyone who enjoys the thrill and excitement of a little bit of CQB action, I urge you to try out Vacant if you haven't already! Great site, absolutely HUGE, great variety of gameplay, and THE NICEST lads you will ever come across! Even when I go up on my own I always find a friendly face for banter and abuse!

    Might see y'all Wednesday!
    Ill bring munchies :P :D

    Sure airsoft would suck if the verbal abuse was taken away, lol


  • Registered Users, Registered Users 2 Posts: 7,561 ✭✭✭andy_g


    Airsoft Sites Subscription not paid.

    Locked.


  • Advertisement
This discussion has been closed.
Advertisement