Boards.ie uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Click here to find out more x
Post Reply  
 
Thread Tools Search this Thread
08-09-2009, 15:57   #1
Sid71
Registered User
 
Join Date: May 2003
Posts: 124
Firebird oil boiler not coming on

I have a Firebird oil boiler just outside my back door and it's not coming on when the timer calls for heat. If I take the panel off and press the reset switch it will fire up ok but I need it to come on at the set times on my centaur timer. Any ideas?
Sid71 is offline  
Advertisement
09-09-2009, 16:04   #2
ART6
Subscriber
 
ART6's Avatar
 
Join Date: Mar 2008
Posts: 2,584
Quote:
Originally Posted by Sid71 View Post
I have a Firebird oil boiler just outside my back door and it's not coming on when the timer calls for heat. If I take the panel off and press the reset switch it will fire up ok but I need it to come on at the set times on my centaur timer. Any ideas?
If you can get it to start by pressing the reset button then presumably it trips when the timer tries to start it. Generally that happens with oil burners if the photocell in the burner doesn't detect a flame withing a given time (a few seconds). It can be caused by a dirty cell or some grit in the burner nozzle.

You can check that by withdrawing the burner from the boiler (there's generally enough power cable and flexible fuel pipe to allow that. Then wipe the photocell clean and unscrew the nozzle and blow it through. Check the oil filter and make sure it's clean.

Make sure you turn off the power at the mains and close the oil valve first though, and be careful not to damage the igniter prongs!
ART6 is offline  
09-09-2009, 19:20   #3
JamesM
Registered User
 
Join Date: Sep 2005
Location: Dublin
Posts: 1,397
Which reset "switch" are you pressing ? On the burner ? On the thermostat ?
What burner is it ?

The burner is brobably a Riello (G3 or RDB) Do not take out the burner. Do not take out the nozzle (you will damage it, and won't be able to blow through it anyway). You won't get at the photocell, by taking out the burner.
Jim
JamesM is offline  
09-09-2009, 20:07   #4
Lex Luthor
Registered User
 
Join Date: Feb 2004
Location: Ireland
Posts: 6,873
did you let the oil go low and now you possibly have an airlock?
Lex Luthor is offline  
10-09-2009, 08:27   #5
Sid71
Registered User
 
Join Date: May 2003
Posts: 124
HTML Code:
Which reset "switch" are you pressing ? On the burner ? On the thermostat ?
What burner is it ?
Its the one on the oil burner. It won't fire up from the Thermostat or the boost button or the time controler
Sid71 is offline  
Advertisement
10-09-2009, 14:12   #6
JamesM
Registered User
 
Join Date: Sep 2005
Location: Dublin
Posts: 1,397
Quote:
Originally Posted by Sid71 View Post
HTML Code:
Which reset "switch" are you pressing ? On the burner ? On the thermostat ?
What burner is it ?
Its the one on the oil burner. It won't fire up from the Thermostat or the boost button or the time controler
What make of burner is it ? How old ?
Jim.
JamesM is offline  
10-09-2009, 16:41   #7
Sid71
Registered User
 
Join Date: May 2003
Posts: 124
Its a slimline heatpac and it's new was bought installed with new house so it only a few month's old. We have'nt properly moved in so there was no need to turn on the boiler over the summer, thanks for your interest
Sid71 is offline  
10-09-2009, 23:58   #8
JamesM
Registered User
 
Join Date: Sep 2005
Location: Dublin
Posts: 1,397
If it is that new, it may not have been commissioned and set up properly - certainly under warranty anyway. You should get someone recommended by Firebird to have a look at it.
Jim.
JamesM is offline  
12-09-2009, 16:37   #9
Sid71
Registered User
 
Join Date: May 2003
Posts: 124
Ok! thanks James
Sid71 is offline  
Post Reply

Quick Reply
Message:
Remove Text Formatting
Bold
Italic
Underline

Insert Image
Wrap [QUOTE] tags around selected text
 
Decrease Size
Increase Size
Please sign up or log in to join the discussion

Thread Tools Search this Thread
Search this Thread:

Advanced Search



Share Tweet