Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Floating foundation for block garden shed!!

  • 23-01-2012 8:15pm
    #1
    Bruce2008
    Registered Users, Registered Users 2 Posts: 236 ✭✭


    Can anyone help me please... I have an existing wooden garden shed (8ft x 8ft) on a floating 4" concrete slab (8ft x 8ft with no reinforcement)... I want to build a block shed (8ft x 8ft again) on this base... I was hoping to put another slab of 6" on top of this with reinforced 10mm wire square grid... drill the existing base and fit bars to bond two bases together... This would give me a floating base of 10"...

    Is this good enough to build a shed with 4" block wall having a gable height of 8ft reducing down to 6ft in the corners... overall length of each wall will be 8ft... I was considering using Quinn Lite blocks to reduce the overall weight of the walls...

    I know the best option would be to dig out the base and put in proper foundations but the whole shed base is surrounded by decking and patios right up to the edge of the base so it would mean destroying the whole garden and starting from new...not really an option...


    Hope someone can give me helpful advice...

    Thanks
    Tagged:


Comments

  • #2
    mickdw
    Registered Users, Registered Users 2 Posts: 23,460 ✭✭✭✭mickdw


    I would cut back the slab around the edges and remove any soil down to a solid base as there is a fair chance that there is all sorts of crap left in place under the existing 4" slab. I would then pour a raft type structure with a deeper concrete section around the outside and the 6" slab on top of old should be fine.
    Id use a wider wall than 4" too.

    You could always make it alittle bigger if you didnt fancy cutting the slab.


  • #3
    Bruce2008
    Registered Users, Registered Users 2 Posts: 236 ✭✭Bruce2008


    mickdw wrote: »
    I would cut back the slab around the edges and remove any soil down to a solid base as there is a fair chance that there is all sorts of crap left in place under the existing 4" slab. I would then pour a raft type structure with a deeper concrete section around the outside and the 6" slab on top of old should be fine.
    Id use a wider wall than 4" too.

    You could always make it alittle bigger if you didnt fancy cutting the slab.

    Thanks Mick for the reply...

    Was kinda thinking I would have to go at the existing base... would I have to fan out the foundation as I go down or can I just do a foundation with straight sides?... also what width and depth would you recommend going down?... would it need reinforcing?... and finally would solid 4" block be okay if I had a pier at the gable... trying to keep the shed as big as possible... every inch counts :D...

    Sorry for all the questions but I scoured the internet for information and there is alot there for houses but not too much for block sheds...

    Thanks again for the prompt reply... greatly appreciated...


Advertisement