Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Tractor problem

  • 15-09-2014 1:05am
    #1
    coyle21
    Registered Users Posts: 222 ✭✭


    Went to change oil in 1494 case international and got half pint of water then grey white liquid so is mixing water in oil, checked radiator and its at correct level but got over 3 half gallons out of sump, seems like alot,
    Any advice appreciated

    thanks


Comments

  • #2
    case956tom
    Registered Users, Registered Users 2 Posts: 180 ✭✭case956tom


    coyle21 wrote: »
    Went to change oil in 1494 case international and got half pint of water then grey white liquid so is mixing water in oil, checked radiator and its at correct level but got over 3 half gallons out of sump, seems like alot,
    Any advice appreciated

    thanks
    sounds to me it could be the head gasket its a lot of water though.is it rare that it needs topping up?,might be a crack in the head or block but it's less likely.


  • #3
    coyle21
    Registered Users Posts: 222 ✭✭coyle21


    some suggested trying that wonderweld product


  • #4
    tomwaterford
    Closed Accounts Posts: 16,768 ✭✭✭✭tomwaterford


    case956tom wrote: »
    sounds to me it could be the head gasket its a lot of water though.is it rare that it needs topping up?,might be a crack in the head or block but it's less likely.

    pressure test the cooling system...only way to know


  • #5
    John J. Lyons
    Registered Users, Registered Users 2 Posts: 155 ✭✭John J. Lyons


    A cracked liner or seal in a liner if head gasket is ok


  • #6
    case956tom
    Registered Users, Registered Users 2 Posts: 180 ✭✭case956tom


    John J. Lyons wrote: »
    A cracked liner or seal in a liner if head gasket is ok
    no liners in a 1490/94 db case.


  • Advertisement
  • #7
    coyle21
    Registered Users Posts: 222 ✭✭coyle21


    case956tom wrote: »
    no liners in a 1490/94 db case.

    tom, what do you think problem / solution to this is...


Advertisement