Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie

vdsl line stats / profile

Options
  • 02-09-2015 8:05pm
    #1
    Registered Users Posts: 866 ✭✭✭


    Hi,

    I got connected to fttc on Monday.
    Prior to this I had adsl, (2+ wasn't available)

    I've had fairly constant stats for the past 2 years:

    ADSL

    Connection Speed 7168 kbps 384 kbps
    Line Attenuation 13.5 dB
    Noise Margin 12.9 dB

    Since switching to fibre my stats are now:
    VDSL

    Connection Speed 25599 kbps 7167 kbps
    Line Attenuation 23.0 dB 0.0 dB
    Noise Margin 14.1 dB 10.10 dB

    Noise margin increase = good

    I'm confused about how attenuation increased so much - different frequencies?

    All checks I've been able to do give a max of 25Mbit for the line

    digiweb line checker gives the following:

    Line Check Results For: **********
    Exchange Code: ************
    DSL Enabled: Yes - 17 MB
    NGB Enabled: Yes - 17 MB
    Fibre Enabled: Yes - 25 MB
    LLU Enabled: No

    Considering my line stats look good & line is steady does anyone know if a different profile with a lower SNR margin (6dB?) would be possible or is this my lot in terms of speed?

    thanks


Comments

  • Closed Accounts Posts: 3,072 ✭✭✭mass_debater


    You need a 9db margin for VDSL, Eircom themselves look for 12db for an absolutely perfect connection


  • Registered Users Posts: 36,164 ✭✭✭✭ED E


    Increase in dAtten is suspicious. The DSLAMS are less accurate with really low numbers in my experience, but at that range it should manage fine. Have you estimated loop length by road?


Advertisement