Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Please note that it is not permitted to have referral links posted in your signature. Keep these links contained in the appropriate forum. Thank you.

https://www.boards.ie/discussion/2055940817/signature-rules
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Misfire errors please help!

  • 26-06-2014 3:36pm
    #1
    Curry Addict
    Registered Users, Registered Users 2 Posts: 1,274 ✭✭✭


    My car, 2.2L 6 cylinder, 110,000miles is giving misfire errors on cylinders 2 & 5. she is running pretty poorly.
    I need to help to determine the best next steps i can take to figure this one out.

    so far i have....

    - replaced the spark plugs.
    - swopped cylinder 2 and 5 coil packs with cylinder 1 and 3.
    - checked the intake air boots etc, new air filter installed 4 months ago.
    - oil level is fine and was serviced 4 months ago.
    - removed and cleaned the fuel injectors and their receptacles.
    - swopped cylinder 2 and 5 injectors with cylinder 1 and 3.

    Missfire errors are persisting on cylinder 2 and 5. She will error at idle or under load.

    I would appreciate some ideas for what to do next...


Comments

  • #2
    kfog
    Registered Users, Registered Users 2 Posts: 96 ✭✭kfog


    Have you had a compression test done or swapped the leads?


  • #3
    biko
    Registered Users, Registered Users 2 Posts: 81,220 ✭✭✭✭biko


    So even if you swap coils over it still misfires on the same cylinders?


  • #4
    Curry Addict
    Registered Users, Registered Users 2 Posts: 1,274 ✭✭✭Curry Addict


    biko wrote: »
    So even if you swap coils over it still misfires on the same cylinders?

    if i swop the coils or anything else the misfires persist on the same cylinders 2&5.

    the leads look fine i checked the wiring etc and im happy they are good.

    a compression test is a good idea i have that noted thanks. I want to make a plan and go through step by step so i don't miss anything and do it in the best possible order rather than just flap around :)


Advertisement