Bolt for attaching rack to Giant Defy

UDP · 21-07-2014 10:54pm #1

Hi,

For some reason I have lost a bolt for attaching my Bontrager rack to my Giant Defy 3. Its an allen key bolt that attaches to the frame under the seat post.

Does anyone know where I could pick up a replacement bolt and washer? Are they standard?

Thanks

UDP · 21-07-2014 11:03pm

Looks to be either an M5 or M6 (takes a 5mm allen key) and ~ 14mm long. Is this a standard thing? Should I get a replacement in my LBS or am I better off going into a DIY shop?

Peterx · 22-07-2014 8:34am

It's usually M5, standard bolt. A bike shop may just give you a spare bolt or else any hardware store has them by the bucketload - in mild steel as opposed to stainless though.

Mr Rubicon Conundrum · 22-07-2014 10:32am

I might have one of these at home, I will check this evening and post it to you if I do. I'll let you know tomorrow.

Recently, my headset became loose and I rounded the hex head. I took it out, brought it to LBS and they just gave me one, FOC. So, try asking in an LBS, if they charge you for it, it will be max €1 i'd say.

Good first post under my new username

Mr Rubicon Conundrum · 23-07-2014 9:51am

I have 2 here that the overall length is 17mm, the thread diameter is 4mm and they are round head as opposed to the socket headed cap screw in the pic. I dont think this would make a difference. Also, you would need to find washers, which should be easy enough.

If you want me to post them to you, PM your address.

Bolt for attaching rack to Giant Defy

Comments