Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Laminate floors

  • 12-04-2011 9:54pm
    #1
    House2011
    Registered Users Posts: 11 ✭


    Where can i get a good quality laminate about 12mm thick at a reasonable price around Galway or the West?
    Had a look in a few builder providers but they all seem to be below 10mm thick.


Comments

  • #2
    Carlow52
    Closed Accounts Posts: 2,389 ✭✭✭Carlow52


    laminate beyond 9 or 10 is unusual and may be just an industrial product

    Why 12mm?


  • #3
    House2011
    Registered Users Posts: 11 ✭House2011


    We were looking for laminate when we were deciding on the finished floor level for the plumber for fitting radiators. We looked around in a few different shops and got some samples. One was about 8mm and the other 2 were 12mm. THere was a big difference in the quality.
    THat shop has since closed down so we're back to the drawing board. Now that we've seen the difference in quality between the two, we are hoping to find approx 12mm somewhere!


  • #4
    Carlow52
    Closed Accounts Posts: 2,389 ✭✭✭Carlow52


    House2011 wrote: »
    We were looking for laminate when we were deciding on the finished floor level for the plumber for fitting radiators. We looked around in a few different shops and got some samples. One was about 8mm and the other 2 were 12mm. THere was a big difference in the quality.
    THat shop has since closed down so we're back to the drawing board. Now that we've seen the difference in quality between the two, we are hoping to find approx 12mm somewhere!

    OK, will send PM as to where I get mine, its 9mm max, is expensive but world class


Advertisement