Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Power requirments for a 6 foot off set topper

  • 01-07-2015 11:10pm
    #1
    PlasticSum849
    Registered Users Posts: 1 ✭


    I'm currently looking at a 6 foot fully offset topper.

    Would a Massey 148 be able to power one of these?
    I know it wouldn't be able to run an 8 foot, just curious what kind of power I'd need for a 6 foot off set. Cant seem to find anything definitive online
    Tagged:


Comments

  • #2
    ABlur
    Registered Users, Registered Users 2 Posts: 821 ✭✭✭ABlur


    According to Fleming who make such a topper, 60HP is needed, I think the MF is only 49HP. On the other hand a semi-offset 6 foot topper e.g. Abbey would be driven easily by the 148.

    Fleming:
    https://www.fleming-agri.co.uk/products/grass-toppers/side-mounted-grass-topper#tab-spec

    Abbey:
    http://www.abbeymachinery.com/pasture-toppers


  • #3
    lakill Farm
    Registered Users, Registered Users 2 Posts: 4,735 ✭✭✭lakill Farm


    Id imagine its the added weight of the offset in comparison to the semi offset

    lets be honest the finish from a offset and semi offset is chalk and cheese


    ABlur wrote: »
    According to Fleming who make such a topper, 60HP is needed, I think the MF is only 49HP. On the other hand a semi-offset 6 foot topper e.g. Abbey would be driven easily by the 148.

    Fleming:
    https://www.fleming-agri.co.uk/products/grass-toppers/side-mounted-grass-topper#tab-spec

    Abbey:
    http://www.abbeymachinery.com/pasture-toppers


  • #4
    ABlur
    Registered Users, Registered Users 2 Posts: 821 ✭✭✭ABlur


    lakill Farm wrote: »
    Id imagine its the added weight of the offset in comparison to the semi offset

    lets be honest the finish from a offset and semi offset is chalk and cheese

    I used to think the finish on the semi was poor until I dropped it down to the last setting. The MF 148 probably also has narrow rear tyres so the finish should be even better than I get with 16.9 34's.


  • #5
    joeyboy12345
    Registered Users, Registered Users 2 Posts: 185 ✭✭joeyboy12345


    Its not really the power requirement,more of a weight issue,have a fleming 6ft off set topper,used to work it on a 60 hp zetor,but it was never able to lift it off the ground when offset, there was a good bit of tyre slippage too on even the smallest of incline,but it did the job!you could get stuck easily too!have since upgraded to 90 hp 4wd and the difference is chalk and cheese!it can lift it clear off the ground when off set,is way safer on the road too! I think at 50 hp youd be pushing your luck!


  • #6
    lakill Farm
    Registered Users, Registered Users 2 Posts: 4,735 ✭✭✭lakill Farm


    PlasticSum849 wrote: »
    I'm currently looking at a 6 foot fully offset topper.

    Would a Massey 148 be able to power one of these?
    I know it wouldn't be able to run an 8 foot, just curious what kind of power I'd need for a 6 foot off set. Cant seem to find anything definitive online

    how about buying an 8ft trailer topper?


  • Advertisement
  • #7
    9935452
    Registered Users, Registered Users 2 Posts: 2,788 ✭✭✭9935452


    PlasticSum849 wrote: »
    I'm currently looking at a 6 foot fully offset topper.

    Would a Massey 148 be able to power one of these?
    I know it wouldn't be able to run an 8 foot, just curious what kind of power I'd need for a 6 foot off set. Cant seem to find anything definitive online

    You will be able to power it but not lift it.
    My uncle was looking at buying a offset one for a 148 but ended up buying a semi offset one as he reckoned it wouldnt lift it.
    The problem with the semi offset one is you are driving down the stuff you are topping.
    I saw a lad one day topping an entire field in reverse


  • #8
    trabpc
    Registered Users, Registered Users 2 Posts: 942 ✭✭✭trabpc


    I presume if you had one of those fancy tractors with PTO and linkages on front, the topper on front would work. Is there a topper that goes completely behind tractor?


  • #9
    trabpc
    Registered Users, Registered Users 2 Posts: 942 ✭✭✭trabpc


    I just see u can get a 9 ft in line topper.


Advertisement