Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest
Q450 Quadcopter
-
07-06-2014 9:30am#1So here's my new Q450 quad currently under construction.
All components from Hobby King. I've tried to make this as easy as possible so there's no soldering involved in this build. Costs so far:
Q450 frame - c.€9.
4 x 935kv Multistar Motors and Props - c.€11 each
KK 2.1 Flight control computer - €25
Power distribution board - €3
4 x 20a multi star ESC - c.€8 each
10cm servo leads - €2
2 x Zippy 2650mAh Lipo batteries - €15 each
Lipo balance charger - €10
Turnigy 9x rx/tx - €50
ESC programming card - €4
Battery strap - €1
Landing struts - €8
Plastic cover to protect KK 2.1 - free (found it in kitchen cupboard and fits perfectly!)
Still a bit to do like attaching the receiver and calibrating the ESCs and the kk2.1. Also need to attach the landing gear and a few other bits but nearly ready to go. I will be attaching a camera to it in future to capture aerial shots and possibly do some fpv.1
Comments
-
namloc1980 wrote: »So here's my new Q450 quad currently under construction.
All components from Hobby King. I've tried to make this as easy as possible so there's no soldering involved in this build. Costs so far:
Q450 frame - c.€9.
4 x 935kv Multistar Motors and Props - c.€11 each
KK 2.1 Flight control computer - €25
Power distribution board - €3
4 x 20a multi star ESC - c.€8 each
10cm servo leads - €2
2 x Zippy 2650mAh Lipo batteries - €15 each
Lipo balance charger - €10
Turnigy 9x rx/tx - €50
ESC programming card - €4
Battery strap - €1
Landing struts - €8
Plastic cover to protect KK 2.1 - free (found it in kitchen cupboard and fits perfectly!)
Still a bit to do like attaching the receiver and calibrating the ESCs and the kk2.1. Also need to attach the landing gear and a few other bits but nearly ready to go. I will be attaching a camera to it in future to capture aerial shots and possibly do some fpv.
Looks good mate.0 -
-
Advertisement