Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Need to replace shower mixer - looking for suggestions

  • 01-05-2014 5:37pm
    #1
    gerdalt
    Registered Users, Registered Users 2 Posts: 219 ✭✭


    The attached photos show the old TOPLISS shower mixer.
    It is almost impossible to adjust temperature due I think to worn pistons on the inside - the things that control the flow of hot and cold water.
    Given the very short pieces of inlet pipes and my desire to minimise damage to the wall tiles, can anyone suggest a replacement unit that might work?
    Or any advice on an alternative approach would be appreciated.
    Ger.


Comments

  • #2
    Megatron!!
    Closed Accounts Posts: 94 ✭✭Megatron!!


    cut them out and blank the hot. Then fit an electric shower, it will cover the crap left behind.

    Or get a new mixer that will cover the damaged and removed tiles.

    or open the unit and see if you can see small slot head grub screws that control the flow from each pipe.

    or tec 7 the handle to the spindle.

    or get a plumber


  • #3
    dodzy
    Registered Users, Registered Users 2 Posts: 10,070 ✭✭✭✭dodzy


    To do it right, you're gonna have to remove some tiles unfortunately. Replacing with an electric shower will look odd down so low on the wall. This job would be made so much easier if that wall backed onto a hot press with pipework access.


Advertisement