Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

34kg Calor Propane Gas Cylinder - Regulator

  • 05-07-2013 10:07pm
    #1
    jprboy
    Registered Users Posts: 1,354 ✭✭✭


    I replaced an empty 34kg Calor Propane Gas Cylinder today and now find that I can't connect our regulator to it as it won't screw on.

    Has there been any change in the gas outlets in these cylinders in the recent times? There's certainly a difference (slight though it may be) between the old and new cylinder.

    I have another old cylinder that I have yet to replace and I can still connect to this with our regulator. The regulator looks very like the one in the link below but is over five years old and not necessarily the same model.

    http://shop.calorgas.ie/reca-automatic-changeover-lpg-propane-gas-regulator-kit-roi.html

    I'll have to get on to the gas supplier in the morning but it would be nice to have a bit of info before contacting them.

    Thanks.


Comments

  • #2
    Robbie.G
    Registered Users, Registered Users 2 Posts: 1,884 ✭✭✭Robbie.G


    jprboy wrote: »
    I replaced an empty 34kg Calor Propane Gas Cylinder today and now find that I can't connect our regulator to it as it won't screw on.

    Has there been any change in the gas outlets in these cylinders in the recent times? There's certainly a difference (slight though it may be) between the old and new cylinder.
    I have another old cylinder that I have yet to replace and I can still connect to this with our regulator. The regulator looks very like the one in the link below but is over five years old and not necessarily the same model.

    http://shop.calorgas.ie/reca-automatic-changeover-lpg-propane-gas-regulator-kit-roi.html

    I'll have to get on to the gas supplier in the morning but it would be nice to have a bit of info before contacting them.

    Thanks.
    As far as I know there has been no change in cylinder connections if you post a pic of cylinder and connections and someone will be able to say for sure


Advertisement