Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Preparing MDF board for oil painting

  • 03-12-2014 9:48pm
    #1
    dare2dream
    Registered Users Posts: 82 ✭✭


    Hi,
    Any advice on how to prepare MDF board for oil painting?
    Do you feel Woody's or any hardware place would cut a size for me?
    Anyone know if it's sold in art shops, I haven't seen it near me.
    Thanks!!


Comments

  • #2
    Red Hare
    Registered Users, Registered Users 2 Posts: 1,393 ✭✭✭Red Hare


    Use white oil based undercoat on the MDF - just the common household stuff you buy in hardware shops will do fine. You can buy primer or gesso in Art supply shops but the undercoat works grand.

    Woodies wont cut MDF but they sell it in small sheets of about 70cm x 90 cm .

    If you want to cut it an ordinary handsaw will do the job.


  • #3
    GreeBo
    Registered Users, Registered Users 2 Posts: 27,253 ✭✭✭✭GreeBo


    Red Hare wrote: »
    Use white oil based undercoat on the MDF - just the common household stuff you buy in hardware shops will do fine. You can buy primer or gesso in Art supply shops but the undercoat works grand.

    Woodies wont cut MDF but they sell it in small sheets of about 70cm x 90 cm .

    If you want to cut it an ordinary handsaw will do the job.
    B&q will cut.
    ahand saw Will leave a terrible finish on mdf.

    You can get sealant specifically for mdf, you don't want it to warp, but oil based all over will give the same result.


  • #4
    makeandcreate
    Registered Users, Registered Users 2 Posts: 451 ✭✭makeandcreate


    ditto - B&Q for cutting. And if you go to the cutting department they often pieces left around that they will cut & sell for less than the floor price.


  • #5
    dare2dream
    Registered Users Posts: 82 ✭✭dare2dream


    Thanks so much!!


Advertisement