If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)

Shooting Forum - Firearms licencing information

stigs42 · 2009-10-25 09:28:01

hi just joined the site :) i have a aya yoman which has become loose . i think its the pin that goes through the front of the action, its 077 on the below link http://www.gun-parts.com/matador/Mat%20Sch.jpg is this a part i can buy or make ?? i have a machine shop . any help most appreciated

Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie

Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.

Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

spare parts for aya yeoman

25-10-2009 10:28am

#1

stigs42

Closed Accounts Posts: 1 ✭

Join Date: October 2009

Posts: 0

hi just joined the site

i have a aya yoman which has become loose . i think its the pin that goes through the front of the action, its 077 on the below link
http://www.gun-parts.com/matador/Mat%20Sch.jpg
is this a part i can buy or make ?? i have a machine shop .
any help most appreciated

0

Comments

#2 25-10-2009 12:26pm

iverjohnston

Closed Accounts Posts: 1,242 ✭✭✭

Join Date: September 2009

Posts: 1206

Hi there,
If you have a machine shop, and can work the correct grade of steel, why not give it a go?
If you are successful, I have an AYA Yeoman u/o with the same problem. Always supposing that it is the pin that is worn, not the frame or the chopper lumps.
Nigel in Cavan,

0
#3 15-12-2014 9:03am

Breffnian

Registered Users Posts: 1 ✭

Join Date: May 2014

Posts: 1

Hi all . bit of bad luck . Broke the stock of my S/S AYA Yeoman . Stuffed it in fact . Anybody know if there is a stock for a Yeoman for sale ?
Would be delighted to get the old doll barking at Woodcock again before the season closes . Thanks

0