Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Please note that it is not permitted to have referral links posted in your signature. Keep these links contained in the appropriate forum. Thank you.

https://www.boards.ie/discussion/2055940817/signature-rules
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

NCT Emissions fail high idle lamba

  • 18-04-2015 4:27pm
    #1
    Registered Users, Registered Users 2 Posts: 1,274 ✭✭✭


    My 2.2 liter petrol car failed NCT Emissions for high idle lamba at 1.34. All the other readings are spot on.

    The tester suggested maybe a hole in the exhaust. So I checked that out today and no sign of any holes etc. It was hard to keep a rag in the tailpipe as the exhaust was so strong it kept blowing it out so that's a good sign.

    Also while checking it out i found a cable disconnect (see attached pic) Maybe the NCT tester forgot to reconnect it?? not sure they even disconnect cables?

    So I spent a couple of hours trying to find where it connects up to no avail. Any ideas appreciated!!! The car is a 2002 BMW E39.

    Also any ideas on the emissions fail and what can cause it?


Comments

  • Registered Users, Registered Users 2 Posts: 8,049 ✭✭✭cletus


    Are you talking about the cable with the red and black plug in the picture?


  • Registered Users, Registered Users 2 Posts: 1,274 ✭✭✭Curry Addict


    cletus wrote: »
    Are you talking about the cable with the red and black plug in the picture?

    No its the one pointed out by the red lines. here is another pic that shows it better.


  • Registered Users, Registered Users 2 Posts: 4,439 ✭✭✭blackbox


    I'm not familiar with that particular car, but high lambda means too much oxygen in exhaust.

    If mixture was as lean as that reading suggests, car would be running badly with poor throttle response and low power.

    I used to have a Porsche that gave high lambda readings when running perfectly because of an air pump that was part of the emissions control - it pumped in air between the engine and cat to assist the cat. I think it was only supposed to pump when the engine was cold.


  • Registered Users, Registered Users 2 Posts: 1,274 ✭✭✭Curry Addict


    blackbox wrote: »
    I'm not familiar with that particular car, but high lambda means too much oxygen in exhaust.

    If mixture was as lean as that reading suggests, car would be running badly with poor throttle response and low power.

    I used to have a Porsche that gave high lambda readings when running perfectly because of an air pump that was part of the emissions control - it pumped in air between the engine and cat to assist the cat. I think it was only supposed to pump when the engine was cold.


    thanks for the insight


Advertisement