Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Please note that it is not permitted to have referral links posted in your signature. Keep these links contained in the appropriate forum. Thank you.

https://www.boards.ie/discussion/2055940817/signature-rules
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

tyre air pressure?

  • 13-07-2014 6:35pm
    #1
    animaal
    Closed Accounts Posts: 815 ✭✭✭


    Apologies in advance for a stupid question :)

    I'm going to be making a long drive with the family and luggage, so beforehand I'm going to check the air in the tyres.

    In the car's handbook, it shows the correct air presure; it shows air pressure value for the car loaded with passenger and luggage, and a different value for the car with me alone.

    What situations do these refer to? If I go alone to fill the tyres, do I go for the "driver alone" measurement, because that's what's in the car at the time I'm pumping the tyres? Or do I use the "fully loaded" measurement, because that's what's going to be in the car when we make the journey?


Comments

  • #2
    landmarkjohn
    Registered Users, Registered Users 2 Posts: 700 ✭✭✭landmarkjohn


    You will want to use the fully loaded option as this is going to be the majority of your driving.


  • #3
    animaal
    Closed Accounts Posts: 815 ✭✭✭animaal


    Great, thanks. I've spent years filling it half way between the two suggested values, just in case.


  • #4
    landmarkjohn
    Registered Users, Registered Users 2 Posts: 700 ✭✭✭landmarkjohn


    animaal wrote: »
    Great, thanks. I've spent years filling it half way between the two suggested values, just in case.

    Well that wasn't a bad strategy if you spend some of the time fully loaded. I spend most of the time in the car on my own but tend to opt for middle to higher pressure in the range to try and maximise fuel efficiency although it compromises comfort slightly by making for a harder more crashy ride.


  • #5
    coylemj
    Registered Users, Registered Users 2 Posts: 25,490 ✭✭✭✭coylemj


    landmarkjohn wrote: »
    I spend most of the time in the car on my own but tend to opt for middle to higher pressure in the range to try and maximise fuel efficiency although it compromises comfort slightly by making for a harder more crashy ride.

    It will also lead to more wear in the centre of the tread and there will be less of the tread in contact with the road which will extend your braking distances.


  • #6
    corkgsxr
    Registered Users, Registered Users 2 Posts: 3,404 ✭✭✭corkgsxr


    coylemj wrote: »
    It will also lead to more wear in the centre of the tread and there will be less of the tread in contact with the road which will extend your braking distances.

    There isn't a specific psi that is the perfect traction/wear.

    I ran a avensis diesel at 37,37 and had perfect flat wear after 20k miles.

    There's a range your fine at. It's not like it's recommended at 33 and if your 35 your centres will wear out.


  • Advertisement
  • #7
    shedweller
    Closed Accounts Posts: 4,029 ✭✭✭shedweller


    coylemj wrote: »
    It will also lead to more wear in the centre of the tread and there will be less of the tread in contact with the road which will extend your braking distances.
    Wrt the centre wear, that is partly true.
    As for the braking distances, i have looked for years for a definite answer to that but it remains elusive. I found no test results, no youtube videos, no nothing.
    I once put 100k on a set of tyres and they went away to be scrapped with the car and had an even 4mm tread depth.
    Braking wasnt an issue at all either. I could brake as hard as i wanted. Tyres spent their life at 38 or so psi.


  • #8
    CJhaughey
    Registered Users, Registered Users 2 Posts: 14,907 ✭✭✭✭CJhaughey


    All tyres are different with regards to pressures, I tend to use the manufacturers spec as a guideline and adjust them to suit, if they feel rolly then put another couple of PSI in them, if they are crashy reduce the pressure a bit.
    Not all tyre sidewalls and carcasses are the same stiffness and this makes a big difference with ride quality.


  • #9
    Joe 90
    Registered Users, Registered Users 2 Posts: 905 ✭✭✭Joe 90


    CJhaughey wrote: »
    All tyres are different with regards to pressures, I tend to use the manufacturers spec as a guideline and adjust them to suit, if they feel rolly then put another couple of PSI in them, if they are crashy reduce the pressure a bit.
    Not all tyre sidewalls and carcasses are the same stiffness and this makes a big difference with ride quality.
    Yes, that is common sense.


Advertisement