Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

replacement barrel lock for upvc door

  • 27-08-2015 1:40pm
    #1
    teamcyclist
    Registered Users Posts: 18 ✭


    Hi folks
    I'm not too hot on the diy but was told it's easy to replace lock on front door so i'll give it a go. What is best lock to replace barrel with? One with key for both sides or one with catch/knob yoke on the inside? I looked up you tube to see how to replace and came across lock snapping which is worrying - what is best way to combat this? Thanks for any help


Comments

  • #2
    stewygriffin
    Registered Users, Registered Users 2 Posts: 1,936 ✭✭✭stewygriffin


    Anti bump/snap lock will cost you about 40 euro.takes about 1 minute to remove old barrell lock and fit new one.Flathead screwdriver is all thats needed.Make sure insurance company will cover you with the thumb lock versions though.


  • #3
    dodzy
    Registered Users, Registered Users 2 Posts: 10,070 ✭✭✭✭dodzy


    stewygriffin wrote: »
    Anti bump/snap lock will cost you about 40 euro.takes about 1 minute to remove old barrell lock and fit new one.Flathead screwdriver is all thats needed.Make sure insurance company will cover you with the thumb lock versions though.

    Philips / slot-head. Not flat.


  • #4
    stewygriffin
    Registered Users, Registered Users 2 Posts: 1,936 ✭✭✭stewygriffin


    dodzy wrote: »
    Philips / slot-head. Not flat.

    You are right sir.philips screwdriver it is.


  • #5
    teamcyclist
    Registered Users Posts: 18 ✭teamcyclist


    thanks lads for help
    is it possible insurance company may not be happy with thumb lock?


  • #6
    massy086
    Registered Users, Registered Users 2 Posts: 2,847 ✭✭✭massy086


    teamcyclist wrote: »
    thanks lads for help
    is it possible insurance company may not be happy with thumb lock?
    Is there glass in the door you are fitting the lock to??. I was on a job fitting a new anti-snap barrel and the customer was telling me they broke his glass and reached in and turned the tumblock. 2k worth of stuff robbed. And insurance would not cover because of the tumb lock


  • Advertisement
  • #7
    teamcyclist
    Registered Users Posts: 18 ✭teamcyclist


    Good point - there is glass yes. I just like those thumb locks instead of having to use a key to double lock - tis getting out in an emergency I'd be thinking of.


  • #8
    massy086
    Registered Users, Registered Users 2 Posts: 2,847 ✭✭✭massy086


    teamcyclist wrote: »
    Good point - there is glass yes. I just like those thumb locks instead of having to use a key to double lock - tis getting out in an emergency I'd be thinking of.
    Ye i know your point I have them in my own front door. But I fitted laminated glass to it so it can't be broken from outside


  • #9
    teamcyclist
    Registered Users Posts: 18 ✭teamcyclist


    In the long term that's what I should do I guess but for now I better stick with the key on both sides. thanks though


Advertisement