Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Rok jigsaw problem

  • 24-07-2014 5:21pm
    #1
    ZippyDee
    Registered Users Posts: 30 ✭


    Hi all! I bought the rok 350 volt jigsaw and I'm having trouble using it. The plastic safety plate blocks one of the set screws even when the plate is lifted and lowered. I can't put in a blade at all. Is this a fault or am I just being thick and missing something?:D Thank you.
    Tagged:


Comments

  • #2
    fussyonion
    Registered Users, Registered Users 2 Posts: 7,821 ✭✭✭fussyonion


    Loosen the screws on the blade. Shove the blade in and then tighten the screws.


  • #3
    SemperFidelis
    Registered Users, Registered Users 2 Posts: 266 ✭✭SemperFidelis


    I have the same one, its cheap rubbish but ok for a limited number of jobs.

    You'll need to plug it in and turn it on, i.e. pull the trigger for a second, it'll move the position of the set screws so its a bit random but you'll eventually get both lined up with the holes in the plastic cover.


Advertisement