Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

aligning sky+Hd dish

  • 23-10-2014 10:11pm
    #1
    Banned (with Prison Access) Posts: 1,019 ✭✭✭


    Hello, I had to move my sky HD+ dish earlier, I moved it to a different position, now I cant get a signal, I used various apps and google to find the direction 28.2 degrees east, its the elevation that's getting me, I was using the LNB arm to get 22 degree elevation, then discovered its an offset dish (typical Sky Dish).

    Can anybody please give me the elevation I need using the LNB arm, or even the offset degree of this dish so I can try get a signal.

    It was set on a thick pebbledash wall and moved about 8ft on the same wall, so was slightly kicked off direction and to add salt to the wound, I start trying to adjust it like the old analogue type until I discovered it don't work, any help appreciated.

    I don't have a sat meter.

    Any help appreciated


Comments

  • Registered Users, Registered Users 2 Posts: 15,668 ✭✭✭✭The Cush




  • Closed Accounts Posts: 2,278 ✭✭✭Thurston?


    stuar wrote: »
    ... I was using the LNB arm to get 22 degree elevation, then discovered its an offset dish (typical Sky Dish).

    Can anybody please give me the elevation I need using the LNB arm, or even the offset degree of this dish so I can try get a signal.

    Dunno about using the LNB arm ...

    Not sure about the offset angle on your Sky dish, probably somewhere in the mid-to-high twenties, if the few I've dealt with are anything to go by, where the dish face would be below vertical for 22 degrees elevation. So if the elevation markings are no help &, in the absense of more precise info., you could start with the dish face vertical & slowly work your way down. (Only a matter of a few degrees.)


Advertisement