Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

control engineering query

  • 27-02-2010 10:26pm
    #1
    catiny
    Registered Users, Registered Users 2 Posts: 130 ✭✭


    I am doing a coursework assignment, in control engineering, and need to know the difference between an open loop transfer function and a closed loop transfer function?
    I'm aware that the answer is probably very obvious, but I'm just looking for clarification!

    Many thanks!
    :D


Comments

  • #2
    Red Alert
    Hosted Moderators Posts: 7,486 ✭✭✭Red Alert


    Open loop controller is one where the controller solely operates on the input signal:

    The input r(t) feeds to the controller, which drives the plant.

    Closed loop controller is one where the output is fed back to the input in some way:

    So the input signal, say r(t) is summed with minus the output y(t) of the plant. The result of that is fed to the controller, driving the plant.

    A simple-to-understand closed-loop system might be when you've cruise control engaged on your car: the cruise controller determines the required engine power based on your road speed.


  • #3
    bnt
    Registered Users, Registered Users 2 Posts: 13,032 ✭✭✭✭bnt


    The term "open loop" is a bit confusing, because it's basically the opposite of "closed loop". It doesn't always mean "no control at all", just that the input control is not "formally" determined by the output.

    An example is a biker who opens the throttle and speeds off, without controlling for a particular speed. The actual speed is then determined by the external conditions (e.g. open road vs. a brick wall). If at any point the rider decides "too fast!" and throttles back to a "safe" speed, he's closing the control loop.

    PS: there's a third form of control called "feed-forward", which is when the control system responds not to a change in the output variable, but to another form of disturbance. Using the biker example: he sees a hill starting and throttles up in response to that, rather than to anything happening to his speed.

    Death has this much to be said for it:
    You don’t have to get out of bed for it.
    Wherever you happen to be
    They bring it to you—free.

    — Kingsley Amis



  • #4
    Laurenzo
    Registered Users Posts: 4 ✭Laurenzo


    Hey guys I'm a final year mechanical engineering student in DIT with one exam left before I can graduate. The exam is Control Systems and it's on Thurs 27th August. Wondering if anyone could help me at this short notice?
    I am willing to do/pay whatever it takes. Dublin area


Advertisement