Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

ferguson ariva 120 combo

  • 12-10-2015 11:37pm
    #1
    vince murray
    Registered Users Posts: 11 ✭


    Hi all,
    I have a ferguson ariva 120 combo tv box.The HDMI connection stopped working a few days ago so I used a scart lead.The picture is ok but I had to leave the HDMI connected or there was a loud buzz over the sound. Is there some kind of fix for this?


Comments

  • #2
    cornholiooo
    Closed Accounts Posts: 150 ✭✭cornholiooo


    Try turning down TV volume and turning up box volume


  • #3
    STB.
    Registered Users, Registered Users 2 Posts: 5,380 ✭✭✭STB.


    vince murray wrote: »
    Hi all,
    I have a ferguson ariva 120 combo tv box.The HDMI connection stopped working a few days ago so I used a scart lead.The picture is ok but I had to leave the HDMI connected or there was a loud buzz over the sound. Is there some kind of fix for this?

    The buzzing noise is from the scart cable block at the back. Its not in the back of the box correctly or not in the back of the TV correctly.

    Having the HDMI plugged in should have no effect.

    If you want to fix your HDMI issue you can reflash new firmware to the box from a usb stick (you will then have the HDMI back working). Instructions here>

    Ariva 120 - Scart only output


  • #4
    vince murray
    Registered Users Posts: 11 ✭vince murray


    Cannot get the box to install the new software. I can see the file in media . The remote control has stopped working as well


  • #5
    STB.
    Registered Users, Registered Users 2 Posts: 5,380 ✭✭✭STB.


    vince murray wrote: »
    Cannot get the box to install the new software. I can see the file in media . The remote control has stopped working as well

    You do not load the firmware by going into the media menu.

    The media menu is only for playing videos/recordings etc.

    There is a menu to update the software. From memory its called Software Upgrade. You then pick the .abs file off the usb and check the allcode and bootloader option and press ok. When it gets to 100%, it will reboot and you will have to rescan your channels, but your HDMI output should be working again at this stage.


  • #6
    getoffthepot
    Registered Users Posts: 746 ✭✭✭getoffthepot


    This is a good replacement for the Ariva 120

    http://www.adverts.ie/9062709


  • Advertisement
  • #7
    vince murray
    Registered Users Posts: 11 ✭vince murray


    Im dumping this box.


  • #8
    STB.
    Registered Users, Registered Users 2 Posts: 5,380 ✭✭✭STB.


    vince murray wrote: »
    Im dumping this box.

    Was it a bit complicated Vince ?


Advertisement