Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Preparing Fireplace for open fire

  • 01-09-2014 10:51pm
    #1
    whowantstwoknow
    Registered Users, Registered Users 2 Posts: 755 ✭✭✭


    Hi,

    Have had a decorative gas fire disconnected from the gas supply (see attached) and have removed the fibreglass "surround" to reveal whats left, again picture attached.

    On the face of it:

    1) is the space big enough?
    2) is it a DIY job to make it ready for an open fire? if so what's actually needed?

    Thanks. One of the pictures is of looking back up the flue....

    W.


Comments

  • #2
    Mech1
    Registered Users, Registered Users 2 Posts: 5,116 ✭✭✭Mech1


    I dont know enough about it, but hide the matches quick. get advise doesnt look good.


  • #3
    Robbie.G
    Registered Users, Registered Users 2 Posts: 1,884 ✭✭✭Robbie.G


    whowantstwoknow wrote: »
    Hi,

    Have had a decorative gas fire disconnected from the gas supply (see attached) and have removed the fibreglass "surround" to reveal whats left, again picture attached.

    On the face of it:

    1) is the space big enough?
    2) is it a DIY job to make it ready for an open fire? if so what's actually needed?

    Thanks. One of the pictures is of looking back up the flue....

    W.

    Your going to have to break out the back of the fire opening and fit a new fireback,backfill it with vermiculite and cement mix and re concrete in the fire bed.
    Not completely a DIY job if you call in a fireplace co they would charge you in the region of €150-€220


Advertisement