Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Internal phone wiring, quick question

  • 25-11-2014 7:13pm
    #1
    my friend
    Banned (with Prison Access) Posts: 7,129 ✭✭✭


    I have 4 points ran back and connected to the Eircom Filter main box on L1 and L2

    The direct plug into the 'main box ' works but the 'extensions ' don't

    I have only two of the four punched down the other two with insulated strands not completed

    Do I need to punch down the other 2 points for all 4 to work? Or does the problem lie elsewhere?

    Thanks in advance amigos


Comments

  • #2
    Mr. G
    Moderators, Technology & Internet Moderators Posts: 4,621 Mod ✭✭✭✭Mr. G


    The centre two pins are what's required to be cables for phone. You should have a max of 4 devices on the line, that's what Eircom recommend as the maximum otherwise your phone may not ring.

    Double check the wires are not cut somewhere using a multimeter or cable tester.


  • #3
    ED E
    Registered Users, Registered Users 2 Posts: 36,169 ✭✭✭✭ED E


    The 4 device max was defined when phones were analogue and the 60hz tone actually caused a bell to ring, you can get away with more when the devices are digital ;)


  • #4
    my friend
    Banned (with Prison Access) Posts: 7,129 ✭✭✭my friend


    Mr. G wrote: »
    The centre two pins are what's required to be cables for phone. You should have a max of 4 devices on the line, that's what Eircom recommend as the maximum otherwise your phone may not ring.

    Double check the wires are not cut somewhere using a multimeter or cable tester.

    Thanks, 3&4 did it for me, had pressed them incorrectly on the Hager push crimps..

    Thanks to all who posted. Much appreciated


Advertisement