Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

where to get push valve

  • 18-11-2012 3:18pm
    #1
    Ging Ging
    Registered Users, Registered Users 2 Posts: 268 ✭✭


    Hi I'm looking for a replacement push spring loaded valve. Basically I want something a bit like this http://www.advecto.co.uk/knee-push-valve/

    The existing one is beneath a handwash sink and is pressed on by a stainless steel flap operated by a persons knee. As its not on show the valve doesn't need to be chrome or have a very large head. The hot and cold water is premixed before the valve so there is a 1/2 inch inlet and outlet at a right angles to each other.

    Ill be calling a few suppliers for this on Monday but if anyone could point me in the right direction for what to ask for it might help. I've looked at BSS, Hevac and Heatmerchants websites without finding anything. i don't really want to spend loads of time explaining the same thing again and again to different suppliers and travelling around looking for one. Maybe commercial kitchen suppliers would be a better bet.

    Thanks.


Comments

  • #2
    LIFFY FISHING
    Registered Users, Registered Users 2 Posts: 1,791 ✭✭✭LIFFY FISHING


    Ging Ging wrote: »
    Hi I'm looking for a replacement push spring loaded valve. Basically I want something a bit like this http://www.advecto.co.uk/knee-push-valve/

    The existing one is beneath a handwash sink and is pressed on by a stainless steel flap operated by a persons knee. As its not on show the valve doesn't need to be chrome or have a very large head. The hot and cold water is premixed before the valve so there is a 1/2 inch inlet and outlet at a right angles to each other.

    Ill be calling a few suppliers for this on Monday but if anyone could point me in the right direction for what to ask for it might help. I've looked at BSS, Hevac and Heatmerchants websites without finding anything. i don't really want to spend loads of time explaining the same thing again and again to different suppliers and travelling around looking for one. Maybe commercial kitchen suppliers would be a better bet.

    Thanks.

    Clondalkin agencies, in Clondalkin Dublin bring in those sinks, they might have spares.


Advertisement