Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Please note that it is not permitted to have referral links posted in your signature. Keep these links contained in the appropriate forum. Thank you.

https://www.boards.ie/discussion/2055940817/signature-rules
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Central locking

  • 19-12-2013 11:54am
    #1
    ronan29
    Registered Users Posts: 13 ✭


    Hello so my question is this.
    I drive a ford focus c-max disel 2005. This morining was driveing to work when the central locking started to lock and unlock while driving now i was using my spare key which does not have the fob on it. Anyhow i got out the car a short bit later to noctice that the back drivers door won't open at all and the fuel cap won't open either. This happened last year as well but the locking central module was replace with a new one by a ford mechainic. The guy who did it says its un-likeley the module is bolwn again what is your guys views or ideals. Thanks


Comments

  • #2
    ronan29
    Registered Users Posts: 13 ✭ronan29


    sorry my spelling is quite bad.


  • #3
    biko
    Registered Users, Registered Users 2 Posts: 81,220 ✭✭✭✭biko


    Sounds like either the module broken again, or a loose wire/earthing issue. An auto electrician should be able to help by reading any error codes and do a diagnostic test.


  • #4
    ronan29
    Registered Users Posts: 13 ✭ronan29


    biko wrote: »
    Sounds like either the module broken again, or a loose wire/earthing issue. An auto electrician should be able to help by reading any error codes and do a diagnostic test.


    The fact that this module is broken again being only maybe two or three weeks over the year and being such a vital part of the car should ford replace this free of charge.


  • #5
    biko
    Registered Users, Registered Users 2 Posts: 81,220 ✭✭✭✭biko


    It might not be the module but you should take it back to the mech that fixed it the last time and let them have a look.
    At least that is what I'd do.


  • #6
    martinr5232
    Registered Users, Registered Users 2 Posts: 2,298 ✭✭✭martinr5232


    Have a look under the glove box at the gem module and see is either of the plugs come loose most likely the brown one on the right as you look in.


  • Advertisement
  • #7
    Polo_Cluvie
    Registered Users Posts: 438 ✭✭Polo_Cluvie


    so you had to unlock the car manually yes? I think your problem could be drivers door actuator..you could try getting wd40 and with the straw stick it into the lock barrel and spray in a generous amount. Give it a couple of minutes and using the key fob lock and unlock. I think this may solve your problem. Everything is connected. Nothing ventured nothing gained..best a luck:)


Advertisement