Fishfinder

connel42 · 02-09-2011 11:16pm #1

I hope you can help with some advice - I am looking for a good fishfinder for use on fresh water lake (Blessington)
Ideally a unit that shows the bottom on a moving disply.
Water temp and individual fish display is essential - I think.
I have heard of a unit that will scan out ahead horizontally and show fish just below the water surface
Colour screen would be nice but not essential
Ideally 12volt and fixed transducer.
Any reccomendations?

stylie · 04-09-2011 7:32pm

I have a fishing buddy 2201. They use a clamp like a rod rest at the side of the boat and then they just slip onto it, very simple and no messing around with batteries or wires. It also has the side finder. Now they are called fishfinders but in all honesty unless you are fishing in 50ft + all the time any fish that it shows up will be spooked by the boat(i use it to troll for ferox). They will tell you the dept and give you a good idea of the bottom but its up to the angler to interrupt that info and to catch the fish. Some people have a mis conception that they are like some window into the fishes world and you can simply drop baits in fron of there noses

connel42 · 04-09-2011 11:07pm

Yeah I've heard the comments about dropping the bait on the nose bu=it far fetched.
So in say 20 ft of water is the clarity poor?
With side scanning can you see a fish near thew surface?
I should have mentioned I will also use it in Skerries during the Makerel season.

stylie · 05-09-2011 9:35am

I have the side scanning and I'm pretty sure it works as described, when dapping I would see a fish symbol the same distance that the fly is working, and a lot of fish come up to the dap that you never see. I also tested it on released fish and it did register the fish moving away from the boat. However I dont think it ever helped catch a fish

At 20 ft what you see depends on the quality of the finder and what width the cone is at 20ft. As I use mine for trolling it tells me the dept, type of bottom. over an area of probably 20square foot. The deeper you are the wider the cone
This is the style I have, http://www.cabelas.com/product/Boating/Boating-Electronics/Sonar-and-SonarGPS-Combos%7C/pc/104794380/c/104707080/sc/104588280/Humminbird-Fishin-Buddies/735123.uts?destination=%2Fcatalog%2Fbrowse%2Fboating-boating-electronics-sonar-and-sonar-gps-combos%2F_%2FN-1100517%2FNs-CATEGORY_SEQ_104588280%3FWTz_l%3DSBC%253BMMcat104793480%253Bcat104707080&WTz_l=SBC%3BMMcat104793480%3Bcat104707080%3Bcat104588280

They are handy for small boats if you are hiring the boats, however they wont stay in the water at speed. If you own the boat and your handy at the DIY I would get the installed type.

stylie · 05-09-2011 9:35am

I have the side scanning and I'm pretty sure it works as described, when dapping I would see a fish symbol the same distance that the fly is working, and a lot of fish come up to the dap that you never see. I also tested it on released fish and it did register the fish moving away from the boat. However I dont think it ever helped catch a fish

At 20 ft what you see depends on the quality of the finder and what width the cone is at 20ft. As I use mine for trolling it tells me the dept, type of bottom. over an area of probably 20square foot. The deeper you are the wider the cone
This is the style I have, http://www.cabelas.com/product/Boating/Boating-Electronics/Sonar-and-SonarGPS-Combos%7C/pc/104794380/c/104707080/sc/104588280/Humminbird-Fishin-Buddies/735123.uts?destination=%2Fcatalog%2Fbrowse%2Fboating-boating-electronics-sonar-and-sonar-gps-combos%2F_%2FN-1100517%2FNs-CATEGORY_SEQ_104588280%3FWTz_l%3DSBC%253BMMcat104793480%253Bcat104707080&WTz_l=SBC%3BMMcat104793480%3Bcat104707080%3Bcat104588280

They are handy for small boats if you are hiring the boats, however they wont stay in the water at speed. If you own the boat and your handy at the DIY I would get the installed type.

Fishfinder

Comments