Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Using an old Eircom modem as wifi extender ?

  • 22-09-2014 5:10pm
    #1
    i lovewine
    Registered Users Posts: 146 ✭✭


    Hi All
    some input here would be great if you don't mind. i decided not to go the homeplug route to extend my Wifi so this is what i want to do but cant seem to get it working as keep getting a page DSL not connected ".but speedtest says i am connected ?
    This is setup
    Eircom f1000 modem as main one and from the first LAN port i have a Cat5 cable running the length of house to the first LAN port a Eircom d1000 modem. i change the DHCP to disabled ?.
    what i need help is have i done everything right for it to work the best it can or have i missed steps ?
    as i said its working apart from some times the " DSL line is not connected " pops up
    regards


Comments

  • #2
    jOHNdOE71
    Registered Users, Registered Users 2 Posts: 21 ✭jOHNdOE71


    i lovewine wrote: »
    Hi All
    some input here would be great if you don't mind. i decided not to go the homeplug route to extend my Wifi so this is what i want to do but cant seem to get it working as keep getting a page DSL not connected ".but speedtest says i am connected ?
    This is setup
    Eircom f1000 modem as main one and from the first LAN port i have a Cat5 cable running the length of house to the first LAN port a Eircom d1000 modem. i change the DHCP to disabled ?.
    what i need help is have i done everything right for it to work the best it can or have i missed steps ?
    as i said its working apart from some times the " DSL line is not connected " pops up
    regards

    I've used this guide with success in the past (sry u may copy and paste address, as Boards won't allow my post links

    labnol.org/software/add-router-to-wireless-network/19716/


  • #3
    i lovewine
    Registered Users Posts: 146 ✭✭i lovewine


    Thanks will try that and double check


  • #4
    jOHNdOE71
    Registered Users, Registered Users 2 Posts: 21 ✭jOHNdOE71


    One point worth noting is when you get to the stage of changing the 'IP address and Subnet Mask' on the old D1000 and you hit/click the 'Apply tab' to save changes, you will notice it seems to hang, but after leaving it for a few minutes and closing and reopening the browser, I was able to then enter the NEW IP address (not the old 192.168.1.254 because remember u've jused changed it) and password.

    Also its a good idea to reset the D1000 back to factory defaults first.


  • #5
    i lovewine
    Registered Users Posts: 146 ✭✭i lovewine


    Cheers for that will do that as well


Advertisement