Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Painting plastic

  • 24-04-2015 9:25pm
    #1
    The lips
    Registered Users, Registered Users 2 Posts: 482 ✭✭


    I recently bought a second hand play house for my son to use in the garden.

    The red door and chimney are badly faded where they were once red.

    I would like to bring them back to life before I assemble the house.

    Any tips/experience on painting plastic?

    I was hoping to sand, primer and gloss them.
    Is there any speciality products or any I should avoid?

    Regards


Comments

  • #2
    arthur daly
    Registered Users, Registered Users 2 Posts: 477 ✭✭arthur daly


    A heat gun can being back plastic depending how bad it is.
    Maybe polish?
    There is a plastic primer in rattle cans should get it in motor factors.


  • #3
    arthur daly
    Registered Users, Registered Users 2 Posts: 477 ✭✭arthur daly


    A heat gun can being back plastic depending how bad it is.
    Maybe polish?
    There is a plastic primer in rattle cans should get it in motor factors.


  • #4
    The lips
    Registered Users, Registered Users 2 Posts: 482 ✭✭The lips


    arthur daly wrote: »
    A heat gun can being back plastic depending how bad it is.
    Maybe polish?
    There is a plastic primer in rattle cans should get it in motor factors.

    This thing is way past polishing/ heat gun.

    II never thought of a motor factors, I will see what they have later.


Advertisement