Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all! We have been experiencing an issue on site where threads have been missing the latest postings. The platform host Vanilla are working on this issue. A workaround that has been used by some is to navigate back from 1 to 10+ pages to re-sync the thread and this will then show the latest posts. Thanks, Mike.
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Laing Regulatory Element

  • 15-03-2014 10:28am
    #1
    gsmiddy
    Registered Users Posts: 9 ✭


    Hi, In a bit of a pickle. I have UFH using Laing Heating Regulators (it looks as if it is connected up to the pump). There are two of these devices in the house, swapped them and it confirmed that one of them is faulty (Laing KR 10 R).

    Long story short, it came via Pulsar (who are out of business). Went to a few plumbing providers who couldnt shed some light on getting a replacement/alternative. Tried to get it repaired (no joy).

    Can anyone on here help with this. Much appreciated. also are there a UFH heating experts in the Cork area (or heating engineers). Thanks again


Comments

  • #2
    shane 007
    Closed Accounts Posts: 914 ✭✭✭shane 007


    Pulsar has been taken over by Grafton Group, whom Chadwicks are owned by. They received all stock from Pulsar so you could try your local Chadwicks branch. If they do not have it, they can search countrywide on the system.

    Failing that, most actuators fit most manifolds. You just need to match the voltage of the actuator, i.e. 12v, 24v or 230v.


Advertisement