ACM P90

As i said, I'm gonna stick some pics up of the new ACM P90 for anyone who's in the market for a P90 without paying TM prices.


This is a really impressive little piece and the finish externally is brilliant. from memory i would say its a little darker looking than the TM but otherwise is a complete clone of it. here's some pics.,














As you can see, they use an awful lot of grease on the gearbox in this, i removed all that and installed bearing bushings, new shims and a mosfet for good measure.
It came with 7mm solid bushings and was pretty well shimmed already. there's also a metal piston head fitted and the gears are typical XYT gears you'll find in most JG and Dboys guns, you'll do well to go through these gears. I've been running them in my stubby with a systema turbo for a long time.,









There's no official brand in the gun at all but I would say from the internals and the type of gearbox that there's a very good chance this is made by JG. the motor, gears and piston are a signature of JG's stuff., other parts like the tappet plate arn't usually the type of materials JG would use though.






If I get the chance I was planning to to a comparison review with the 2 of these guns. TM and ACM side by side. this chrono'd a max of 317 on the chrono and its lowest was 312, the rate of fire is pretty average for most guns at about 12ishrps.,