Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all,
Vanilla are planning an update to the site on April 24th (next Wednesday). It is a major PHP8 update which is expected to boost performance across the site. The site will be down from 7pm and it is expected to take about an hour to complete. We appreciate your patience during the update.
Thanks all.

tilt and trim issue.

Options
  • 17-03-2019 8:42am
    #1
    nokiatom
    Registered Users Posts: 422 ✭✭


    the tilt and trim switch on the remote control only works in one direction only. the switch buttons on the engine are working ok. any ideas what could be wrong before i start stripping ? cheers.


Comments

  • Options
    #2
    Steve
    Moderators, Category Moderators, Entertainment Moderators, Sports Moderators Posts: 22,584 CMod ✭✭✭✭Steve


    First guess would be a loose broken connection between the trim switch and the engine.

    If you can identify the pins at the engine connector end, use a multimeter to diagnose.


  • Options
    #3
    nokiatom
    Registered Users Posts: 422 ✭✭nokiatom


    Steve wrote: »
    First guess would be a loose broken connection between the trim switch and the engine.

    If you can identify the pins at the engine connector end, use a multimeter to diagnose.

    thanks for that Steve. today i will start tackling it


  • Options
    #4
    sogood
    Registered Users Posts: 1,258 ✭✭✭sogood


    I had a similar problem when the little, very light Microswitch on my remote gave up. I just re- routed the wires and fitted a two position
    ( momentary) on / off switch on the dash. Heavier duty and more durable.


Advertisement