Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie

ReCap a C64 ?

  • 03-11-2018 12:09pm
    #1
    Registered Users Posts: 4,183 ✭✭✭


    Anobody re-done the caps in a C64 ?
    Or know where I could get it done ?


Comments

  • Registered Users Posts: 4,201 ✭✭✭KeRbDoG


    Yup, done it - I bought a kit (as I'm lazy) from https://retroleum.co.uk/c64-capacitors along with a cap kit for a Speccy 48k while I was at it.

    Many guides on YouTube to help you along with different methods of removing the old caps and installing the new caps


  • Registered Users Posts: 4,183 ✭✭✭deadl0ck


    KeRbDoG wrote: »
    Yup, done it - I bought a kit (as I'm lazy) from https://retroleum.co.uk/c64-capacitors along with a cap kit for a Speccy 48k while I was at it.

    Many guides on YouTube to help you along with different methods of removing the old caps and installing the new caps

    Apart for the cap replacement are there any other "must do" things ?


  • Registered Users Posts: 4,201 ✭✭✭KeRbDoG


    deadl0ck wrote: »
    Apart for the cap replacement are there any other "must do" things ?

    A general cleaning and if you fear overheating of the main processing chips, installation of good quality heatsinks.


  • Registered Users Posts: 4,183 ✭✭✭deadl0ck


    KeRbDoG wrote: »
    A general cleaning and if you fear overheating of the main processing chips, installation of good quality heatsinks.

    Are there heatsink sets also ? (I'm also lazy)


  • Registered Users Posts: 4,201 ✭✭✭KeRbDoG


    On that site I linked to before, yup - but they are aluminium not copper but each to their own


  • Advertisement
  • Registered Users Posts: 4,183 ✭✭✭deadl0ck


    So I finally took down my C64 form the attic - it was still in it's (very tatty) box. It's a C64C and it's gone very yellow (a lot more yellow than I would have though considering it was not left in sunlight at all)
    Anyhoo - I plugged it in and power light came on, but no picture :(
    I'm using an S-Video cable from retro computer shack
    Bugger !


  • Registered Users Posts: 4,183 ✭✭✭deadl0ck


    So I reckon it's the PSU - it's a 4 pin out on the supply I have. The 5V DC seems fine but the 9V are around 2V and 7V


  • Registered Users Posts: 5,780 ✭✭✭eddhorse


    Which power supply do you have?


  • Registered Users Posts: 4,183 ✭✭✭deadl0ck


    I was wrong - the power supply is reading 10.4 on the pins - i was reading it wrong as it's 2 phase so I should have been on pin 6 and 7 :o

    Anyhow - that was under no load (so a direct read off the pins with a multimeter), but after a bit more reading, and a post on the lemon64 forums I checked the 2 RAM chips and they are reading 1.46 V instead of 5 at pins 1 and 9

    So it could be the power supply after all

    And...if it sounds like I don't really know what I'm talking about it because I don't :) I'm just learning as I go along.....

    Edit: here's a look at the old girl:
    20181119-193733.jpg 20181119-193739.jpg 20181119-194545.jpg 20181119-194549.jpg 20181119-194554.jpg 20181119-194722.jpg 20181119-194733.jpg 20181119-222831.jpg


  • Registered Users Posts: 2,067 ✭✭✭safetyboy


    deadl0ck wrote: »
    I was wrong - the power supply is reading 10.4 on the pins - i was reading it wrong as it's 2 phase so I should have been on pin 6 and 7 :o

    Anyhow - that was under no load (so a direct read off the pins with a multimeter), but after a bit more reading, and a post on the lemon64 forums I checked the 2 RAM chips and they are reading 1.46 V instead of 5 at pins 1 and 9

    So it could be the power supply after all

    And...if it sounds like I don't really know what I'm talking about it because I don't :) I'm just learning as I go along.....

    Edit: here's a look at the old girl:
    20181119-193733.jpg 20181119-193739.jpg 20181119-194545.jpg 20181119-194549.jpg 20181119-194554.jpg 20181119-194722.jpg 20181119-194733.jpg 20181119-222831.jpg
    That looks like it's been very damp.


  • Advertisement
  • Registered Users Posts: 4,183 ✭✭✭deadl0ck


    safetyboy wrote: »
    That looks like it's been very damp.

    It was on my parents attic for many years before I rescued it, and it might have been a bit damp there (even though it was in its original box and styrofoam).

    Any tips as to how I should approach it ?


Advertisement