Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi all,
Vanilla are planning an update to the site on April 24th (next Wednesday). It is a major PHP8 update which is expected to boost performance across the site. The site will be down from 7pm and it is expected to take about an hour to complete. We appreciate your patience during the update.
Thanks all.
Vanilla are planning an update to the site on April 24th (next Wednesday). It is a major PHP8 update which is expected to boost performance across the site. The site will be down from 7pm and it is expected to take about an hour to complete. We appreciate your patience during the update.
Thanks all.
Photos of your Airsoft equipment.(NO DISCUSSION)
Options
Comments
-
-
AGM M14 with Plastic stock.
This is a Heavy AEG. Its heavier and almost as long as my real steel rifle.
The Magazine is very solid feeling. The Trigger is strong and its trigger weight
feels great almost like a real military trigger. (Heavy) You feel like you
are squeezing a real trigger unlike other AEG's I have used. The Safety
catch is on the front of the trigger guard. I did not know this until one
of the lads here pointed it out to me. The Scope is real Niko Sterling 6-24x
56mm objective, side wheel focus with an illuminated mil-dot reticle.
Its tube is 30mm so I don't have high mount rings to mount it to the ris rail.
(I am not sure high mounts will even clear the rear iron sight)
The Flash eliminator is metal:
The Gas chamber section is light plastic
Hop up is at the bottom inside the magazine housing.
Fire selector switch is weird, have been told to make sure its fully at either
fully or semi auto and not any place in between as it can damage the AEG.
Wider view of the cocking lever.
The Ris rail attached to the top of the receiver blocks propper use
of the iron sights. When you look through the back sight the post on the
front sight is obscured.
The top front of the AEG is really cheap light flimsy plastic not nice
stamped steel would have been great but it is an el-cheap aeg.
Back sight is adjustable up/down/left/right be careful when fiddleing
as the screw that hold it in place comes loose with use.
Cool......
Pulling back the cocking lever is great as a fake bolt cover moves left and back to expose the inside of the gearbox and also there is metal tube in front
of it that gets pulled back. This makes an impressive sound when you
pretend to cock the M14
The Battery housing is really cool.
Over all. LONG, Heavy, Really Long Barrel giving fantastic accuracy.
I dont feel its solid enough to take with you on regular skirmishes unless
your doing a sniper role. The plastic just feels to light and breakable.
Its not like the really tough solid plastic ABS you would get on a JG G36.
(only my opinion though)
~B0 -
-
-
-
Advertisement
-
-
-
-
-
Family portrait
Top Tokyo Marui VSR-10 G-SPEC with 3-9 x 40 Scope
Middle JG G36c
Bottom DBoys M4 CQB/R with China Eotech 551 Red/Green dot sight
Bell M92 in flight case from Maplin with propane adaptor and propane gas/
Bell M92
JG G36C
TM VSR-10 G-SPEC
DBOY M4 CQB/R
0 -
Advertisement
-
Family pic from today when doing some house cleaning.
The Pic is a bit blurred should have taken it outside but I would
have freaked the neighbors out. Maybe in the future when I have
added to the collection......still have no place to display or put them all
that ensures they are safe and the paintwork does not chip........
they are stuck in a wardrobe usually.
0 -
The second one finnally arrived today, will post a review when i get a chance to try them at the weekend at any distance. just managed to try them arround the house with the Throat mics - Lots of noise around but no noise on the radios except for the whipser. gotta say impreseed considering the mics cost $12
Bought from EBay http://stores.ebay.ie/Best-1-Choice_W0QQcolZ4QQdirZ1QQfsubZQ2d33QQftidZ2QQtZkm
€50 delivered arrived about two week later
and
http://search.ebay.ie/_W0QQsassZcentury-digital
€75 delivered with two throat mics arrived after like three days0 -
-
-
Some Updated Pics of My TM G3-SG1
It is now 4ft 9 inches long
Changes from stock:
Systema reinforced gearbox
Completly new internals(Systema) with 1j spring
Kings Arms reinforced body pins
G&P R.I.S.
G&P tactical foregrip
G&P rail covers
Guarder 14mm thread adaptor
Kings Arms 335mm Silencer
Hero Arms 3,000rd auto winding drum mag
A.C.M. G3 dual rail scope mount
A.C.M. 25mm Medium Scope Rings
Tasco 3-9x 40mm Scope
0 -
British 80's Falklands era loadout.
King Arms FN FAL, 3 low caps, 1 high cap. Real SLR sling.
Full pattern 58 webbing.
Mark V helmet with camo netting.
Things needed;
L1A1 hand guard, flash hider and carry handle.
Scope rail + Trilux SUIT scope (hah!)
Things to actually put in the webbing.
More bloody low cap mags!0 -
My 2 pistols so far,
Will be adding a G36c, MP7, GBB glock 23 and a few other bits and pieces.,;).,
Got this glock from liamo333 the other day and did a little work on it to make it look new again and to fit into the fobus holster.., the rate of fire on these is great on full auto, perfect backup pistol.
love the look of the M9, im gonna pick up a high end one in the future,
0 -
Here are some pics of my stuff
TM Mp5a5 with a King Arms Red Dot Scope
KJ Works P229
KJ Works P226 (top) and P229 (P229 is shiny because I had just taken it out of its wrapping)
Hoping to get a CA M15a4 Tactical Carbine from Airsofteire, a Troy style silencer and an M series scope from eirsoft to make something like this...0 -
-
-
Advertisement
-
thought id update mine since the toys4bigboys show.,
top one is a galaxy MP5 from shiva,
G36c from shiva also,
Bell M9 GBB got this in forsale section from moneyman
Tokyo Marui M9 electric got it in the forsale section aswell from DR.Pman,
Cyma 030 G18c AEP with repainted slide, got in forsale section from Liamo,
have a WE baby hi capa on its way from ehobby and plenty more if i dont get control of this habbit.,lol
0 -
-
Had my old real steel rifle scope lying about the house doing
nothing since I upgraded and got myself a Lupold!
Decided to order some 30mm rings that suited a 20mm rail.
Stuck em on a while ago. The scope looks as though its drooping
but its only the camera angle. Nice to have a mil-dot on it.
Its lowest setting is 6x so it may be too much for a skirmish.
~B
0 -
-
-
Top Down, DBoys Full Metal M4A1 with Replica Colt Armoured Scope, Yonezawa Luger KG9 pat. 1983, Point S&W m645 unknown year, WE m1911, WE Hi Capa 5.1 Govt. with working grip safety!, 10€ Cyma Shotty best two and a half pints ever.
Picture of the KG9 and original box, pat 1983, built 1986, serial# 937021 as on box.
Blurry Camera means more pics to come.0 -
Finally got around to putting all of mine in the one place and taking a pic.
From top to bottom:
TM G3SG1
JG MP5SD5
Double Eagle UMP
Maruzen Walther P99 (Left)
TM SIG P226 (Right)
Galaxy MP5K PDW.
More to come as long as I can sneak them past the Missus and pretend I have had them for ages when she finds them (seems to work for her when she buys shoes!
). 0 -
-
-
Advertisement
-
Advertisement