Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie

Side Hinged Garage Door question

  • 01-04-2019 1:23pm
    #1
    Registered Users Posts: 6,442 ✭✭✭


    Opening we have is 8ft high, approx 8'6 wide.

    If we go for a wooden side hinged door (with window) in the door - is an 8ft door too large?

    Would we better with 7ft door and window over it.

    I think the first is nicer, but I have concerns the door would be too heavy.

    Thanks.


Comments

  • Registered Users Posts: 2,804 ✭✭✭recipio


    No carpenters on here ! An 8 foot door is fine as long as the hinges are robust enough to support it. You may need to put a pivot hinge on the bottom edge.


  • Registered Users Posts: 3,843 ✭✭✭tabby aspreme


    Is it a single door, or double doors, 8ft high by 4ft 3", would be no problem, but 8ft 6" wide would put a lot of pressure on the frame, hinges and the door itself, also it could be dangerous in windy weather. An Iroko door 8ft by 8ft 6" would weigh 120 - 150 kgs.


  • Registered Users Posts: 1,464 ✭✭✭Double Barrel


    Tombo

    Three ( 3 per door) @ 36” Heavy duty straight or cranked strap hinges ( hook & band hinges ) with 3/4” eye mated to 3/4” gate hanger pins.
    Should work just fine on heavy doors.

    Good luck

    128_Hook-Band-Hinge-Galvanised-Pair.jpg


  • Registered Users Posts: 1,577 ✭✭✭Bonzo Delaney


    Possibly a better weight transferring method would be to use two of the strap hinges near the top say 150mm down and another 150mm below that. Then for the bottom install a spud stone to transfer the weight of the door to the ground.


  • Registered Users Posts: 1,577 ✭✭✭Bonzo Delaney


    Actually after thinking about that with a spud on the bottom the hinges on top wouldn't work as the piviot centers would be different and the door wouldn't move .
    You'd have to install a piviot hinge to the head of the door and frame head to maintain the lock it points remain the same when opening


  • Advertisement
Advertisement