Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie

Information on Reticle Dimensions

  • 03-08-2020 1:05pm
    #1
    Registered Users Posts: 2,759 ✭✭✭


    Can some help and or clarify on the following two queries.

    Using Schmidt and Bender recticles and manual as source material - in particular the A8 reticle of a 6x42

    521990.jpg

    521991.jpg

    Part 1:
    1. Do I read figures in column '8' on the table as referring to A8 reticle.
    2. What are the two sets of numbers in each box (they don't seem to equate to inchs versus centimeters).
    3. All values are for a range of 100 yards?


    Part 2:
    If all values are for a range of 100 yards is there a formula for other ranges ie 200 and 300 yards.

    Thanks.


Comments

  • Registered Users Posts: 6,587 ✭✭✭Feisar


    http://schmidtundbender.de/phocadownloadpap/produktkataloge/sub-jaegerkatalog-2011-en.pdf

    Page 32, at least it's in English. The second set of figures are in cms and they would equate as it's not also in yards. Its x amount of cms at 100 meters which is 109.36 yards.

    Example above: 50.5 inches divided by 100 and multiplied by 109.36 (100 meters) = 55.22 inches, which equals 140.3cm.

    As regards a formula it just multiplies out: 50.5 inches at 100 equals 126.25 at 250.

    First they came for the socialists...



  • Registered Users Posts: 2,759 ✭✭✭cookimonster


    Feisar,

    Thanks for that, brilliant. I have a few online manuals but haven't seen this one before.
    Example above: 50.5 inches divided by 100 and multiplied by 109.36 (100 meters) = 55.22 inches, which equals 140.3cm.
    .....

    ....... got it now, I was just converting one unit for another and not allowing for inches/ yards compared to centimeters/ metres.

    Thanks again.


  • Registered Users Posts: 1,391 ✭✭✭extremetaz


    See here: https://www.schmidtundbender.de/en/downloads/category/360-a8.html

    It's a strange way to layout a reticle to my mind being honest. There's varying levels of convenience to working in metric or imperial.

    Basically you've got approximately +/-18" at 100yards between the posts.
    It might be easy enough to think of this one in feet. In which case you've got +/-1.5' per 100yards.

    The reticle lines themselves then are clearly easier to use if you're in Imperial.
    The fine lines are 0.5" per 100 yards, and the posts are +/-2.5" per 100 yards.


Advertisement